Yash

Yash

That makes sense @Darshil_Shah1, thanks for jumping in!

Yash

Thanks so much, @Edward_Rumsey! I am sorry that I didn't provide you enough context but your point number 3 is exactly what I was looking for to solve this use case. Thanks again!

Yash

Hello Community, Please forgive me if this was already answered anywhere else but I do have use case that I need to solve for. We have a recurring campaign that pulls the recipients based on some conditions and send them an email on daily cadence. We need to send another email to sub-set of the same list after 7 days. I know this is something we could accomplish using the wait step and then send the other email but because of some other restrictions I really cannot use a wait step within the flow tab of the smart campaign. So, is there any way that I can query for a list of recipients within the smart list tab of the smart campaign to check for the ones that received the recurring email exactly on the seventh day before from today? Thank you in advance.

Yash

Thanks @Darshil_Shah1!

Yash

Yes, when I say another track I meant another nurture program stream. Question: when I create a recurring batch campaign that runs daily to pick up the exhausted leads does that pick only those contacts that have received the last email from the stream in the past 24 hours?

Yash

Hello Everyone. The team asked me if we have a way to: 1. Identify the event lists that we would import in the future 2. Automatically send these lists to a nurture stream We follow a standard naming convention for these event programs and all the event lists will be imported under these programs. Keeping this in mind/through any other approach, do we have a way to automate this? Thank you.

Yash

Hello Community! Our nurture/engagement programs have a total of four emails. When a contact/lead gets all these four emails from a specific nurture track, we would want to push it to another nurture track based on a few other parameters(like revenue, industry, num of employees etc) and while doing so we don't want to send email 1 from the new nurture track right away but we would rather make them wait for 7 days before we send email 1 from the new nurture track. What is the best way to accomplish this? Thank you in advance.

Yash · ‎05-23-2022

Thanks, @Darshil_Shah1

Yash · ‎05-23-2022

Hello Community, I have been asked to remove the prospects from our nurture tracks based off of changes to a field value. Please consider the following scenario: Field X = Value A (The contacts will be pushed to nurture 1) Field X = Value B (The contacts will be pushed to nurture 2) Field X = Value C (The contacts will be pushed to nurture 3) Let's assume the prospect who is currently in 'nurture 1' fills out another form and their value changes to something which makes them qualify for 'nurture 2'. While this the case we need to remove them from 'nurture 1'. How do we do this? Thanks in advance.

Yash · ‎03-08-2022

Thanks @Jay_Jiang & @Darshil_Shah1!

Yash · ‎03-08-2022

I have received a list from our events team that has the information about the leads that attended our event. I was asked to import only net new contacts from that spreadsheet meaning just importing the contacts that does not already exist in our system. Is there any automated way to do this?

Yash · ‎12-20-2021

Thanks so much, @Amit_Jain! It's working perfectly fine 🙂 Thanks again!

Yash · ‎12-16-2021

Thanks so much, @Michael_Florin

Yash · ‎12-16-2021

Hello Everyone, We have a dynamic email which is going to serve content based on the job title of the recipients. So a recipient with job title sales would receive content A, a recipient with job title marketing would receive content B and so on. As I am more comfortable with Velocity scripting I would prefer to use it here. The ask is to perform match for recipients whose job title would CONTAIN 'Market' OR whose Department would CONTAIN 'Market' for instance. Can anyone please guide me the syntax to write the above condition please. Thanks

Yash · ‎12-09-2021

Thank you, @Tara_Dacci!

Yash · ‎12-09-2021

Hello Community. We have an email and more than one section within the body copy has been linked to the same URL and the team wants to know the percentage of clicks each section has generated. Is this possible. Thank you.

Yash · ‎11-16-2021

Thank you, Katja 🙂

Yash · ‎11-16-2021

Hi Team, We have two static lists A & B. I need to move few of the recipient/lead records from list A to list B. Can anyone please let me know how I could do this. Thank you in advance.

Yash · ‎10-14-2021

Thanks so much, @SanfordWhiteman 🙂

Yash · ‎10-14-2021

Hello Everyone. Might be a silly question but wanted to check this scenario. In the below, the referrer says Contains https://www.example.com? So is the smart campaign going to match for any single character after https://www.example.com or is it going to match any string that contains https://www.example.com? Or in other words would question mark(?) be treated as a wild-card character or is it just a normal character. Please advise, thank you!

Yash · ‎08-18-2021

Hi Team, I have a list of lead/contact records that I need to import(normal list import) into our Marketo instance. We are required to import this list into a different partition(some other partition than the default partition). We raised a support request with Marketo and it seems to be possible at the outset. Here's what the support team says: For allowing Duplicates between Partitions, we would add a Custom Deduplication rule that looks at the partition ID. This means, that when looking for duplicate records, Marketo will check both the email address and the partition ID to see if it's unique. If one of the two is unique, Marketo will create a new record. You can read through this article to get a better idea of the functionality: https://nation.marketo.com/t5/Knowledgebase/Custom-Deduplication-Rule-Creating-New-Lead/ta-p/253582 I am being told that I would need to include the partition ID as well in the CSV file so that leads get imported to the right partition but unsure how to find partition ID and what the label should be for the partition column in the CSV file. If anyone could elaborate the process that would be really helpful. Please advise. Thanks

Yash · ‎06-11-2021

Hi @Katja_Keesom thanks for your thorough response as always. This is exactly what I was looking for.

Yash · ‎06-10-2021

Hi Team, Can we abort a currently deploying email in a smart campaign? Just curious to know about the following use case-for instance, if we have a list of 10K contacts and have decided to send an email and hit send which triggers the email deployment. Soon I realize there is something wrong within the email and need to immediately stop the email deployment. Is there any way this can be done.

Yash · ‎03-30-2021

My apologies, yes I should have digged into this by myself. Thanks for all your help @Michael_Florin

Yash · ‎03-30-2021

This is awesome and truly helpful! Thanks @Michael_Florin Lastly, if I were to look for contains as the matching operator what would the comparison operator look like. For instance, industry vertical contains 'health' so that it would match 'healthcare' as well as 'health and wellness'. Thanks again.

Yash · ‎03-30-2021

@Michael_Florin would you please provide me the syntax that outlines the use case please. Velocity script is new to me and any guidance would be much appreciated. Thank you in advance. CC: @SanfordWhiteman

Yash · ‎03-30-2021

Hello folks, we have an email that needs to be dynamic. W e are hoping that one section of the email copy will vary depending on the industry field of the prospect. For example, if Jane Doe is in sales she will receive different body text vs John Smith who is marketing. I did go through a couple of other posts with regards to this but could not take it to the finish line. I have already created a segment in Marketo and struggling to add it in the email as I build emails using custom HTML & CSS. I am more used to the following approach while using other marketing automation platforms but unsure if Marketo would support something like the following: if industry_vertical=="sales" serve this block of content else if industry_vertical=="marketing" serve this block of content else serve this block of content(default) endif Any advice would be greatly appreciated. Thanks

Yash · ‎03-22-2021

This is exactly what I was looking for. Thanks so much @SanfordWhiteman !!!

Yash · ‎03-19-2021

Thanks so much @Katja_Keesom I will make sure to test process for small volume before I mass update the whole list.

Yash · ‎03-19-2021

Hi Everyone, I have a list of 150K contacts and I have been asked to update a specific field within the contact record for the contacts that exists in the list. We need the contact record's field value to be updated with the corresponding column value from the spreadsheet only when the field value is empty or in other words if the field is already populated then it shouldn't be updated. Thanks

Online Status	Offline
Date Last Visited	a week ago

Date Registered	‎07-12-2020 02:22 AM
Date Last Visited	a week ago
Total Messages Posted	77
Likes Received	4

Top Badges Earned

Re: List Pull

Re: List Pull

List Pull

Re: List Push

Re: Nurture

List Push

Nurture

Re: Remove contacts from nurture

Remove contacts from nurture

Re: Import net new contacts

Import net new contacts

Re: Email Footer vs Admin Footer

Betreff: Dynamic Email

Dynamic Email

Re: Link Clicks

Link Clicks

Re: Move Static List members to another static lis...

Move Static List members to another static list

Re: Evaluation Criteria

Evaluation Criteria

Importing a list of leads/contacts to a separate p...

Re: Abort email send

Abort email send

Re: Dynamic content

Re: Dynamic content

Re: Dynamic content

Dynamic content

Re: Dropdown Field

Re: Contact Import

Contact Import