Adam_Benitez1

You would be getting subscriptions for the type you choose for the leads you choose. Unfortunately, it won't subscribe you to all Web leads if you choose "Web". Maybe try subscribing to "Web", "Email", "Milestone" for a lead you know will do some activity to see if it works.So just to clarify, you w...

Hi, Alexis.Yes, that's how you do it. There may be a couple of minute lag from when you click Subscribe though.To have their lead feed work, you'll have to check the RSS Feed setting in Admin > Sales Insight > Settings > RSS Feed.Enable RSS for Sales Insight - Marketo Docs - Product Docs

If you need to be able to make changes within 12 hours prior to launch and are using a regular email send program make sure you don't have other large campaigns running at the same time or they could be put in a queue to be processed after the others.And even despite this, if you have a shared Marke...

I echo the two responses above, but would also run a trigger campaign with the flow step Devraj suggested. The Smart List portion of the campaign would contain three filters and filter it by "Any".The filters would be:1. Email contains "@emaildomain.com" (and any and all variations of the domain)2. ...

1 addition to this is that you want to make sure that you go into the "Set Field-Level Security" section on the field and make sure that you have the user that you use to sync data between the systems checked as "visible". In my case, our user is called "Talend Marketo Integration" so that user woul...

Obvious question, but do they have the same email address? If yes, then is the Contact already in Marketo? If the Contact isn't in Marketo,then even though it is in SFDC, Marketo won't know to merge the lead it has in Marketo with the SFDC contact, thus it will create a new record.

this will have to work although it's not going to give you the accurate random sample % since you're likely to have additional filters on the campaign, right?

What I'm saying is that within the Smart List, if you have advanced filters, you can't use the Random Sample filter. Jamie's example is probably the best we can do though if you're taking say 30% of a list and using that list as a filter in campaign, you're going to get less than 30% if you have add...

Thanks, Jamie.