Knowledgebase

Featured article

(Article Updated - August 2024) Overview A blocklist is a database of IP addresses or domains that have been associated with the sending of unsolicited commercial email or spam. Internet Service Providers (ISPs) and business email networks use information from blocklists to filter out unwanted email. As a result there can be a drop to inbox delivery rates if the IPs or domains involved with sending email are listed on a blocklist. Marketo’s Email Delivery and Compliance team monitors blocklist activity on our IPs and domains daily. When an impactful listing occurs, we reach out to the blocklist, attempt to identify the sender that triggered it, and work with the blocklist organization to get the listing resolved. There are thousands of blocklists, most will not have a significant impact on your delivery rates. Below, we have compiled a list of the blocklists that commonly appear across our sender ecosystem. Each blocklist has been grouped into a top tier (Tier I) by most impactful, to the bottom least impactful tier (Tier III). These may have little to no impact across our sender network. Tier I Blocklist Spamhaus (SBL) Impact: Spamhaus is the only blocklist that we categorize as a Tier I for a reason: it has by far the greatest impact on delivery. It is the most well-respected and widely used blocklist in the world. A listing at Spamhaus will have a negative effect on your ability to deliver emails to your customer’s inbox and can cause bounce rates of over 50%. Evidence suggests that most of the top North American ISPs use Spamhaus to inform blocking decisions. How it works: Unlike many blocklists, Spamhaus lists senders manually. This means they are proactively watching sender activity, collecting data, and base listings on a number of variables. Most commonly senders are listed for mailing to spam trap addresses that Spamhaus owns. Sometimes Spamhaus will list senders based on recipient feedback as well. Next Steps: Please note that every Spamhaus email can be quite different depending on the information provided and the nature of the listing . Because Spamhaus has multiple types of listings, the remediation steps are based on which type of blocklisting has occurred. We have listed the most common types to affect Marketo customers, from most to least impactful. Impact can range from a full block of top severity, to a partial block that is less severe (CSS Data, DBL). If remediation isn’t performed and the problem not addressed, these listings can increase in severity and turn into a full blocklisting. Spamhaus Blocklistings Types SBL (full blocklisting) Considered the most impactful. Remediation steps: Our team monitors closely for Spamhaus listings. Once alerted to the listing, we send an email notifying the customer, and reach out to the Spamhaus contact to start the remediation process. Only a Marketo delivery team member should be in direct correspondence with the Spamhaus contact, to speak on behalf of the customer, and to relay their questions and instructions, ensuring quick resolution and reduced impact. Senders that trigger this listing on a shared IP range will be moved to a more isolated, penalty range (IPB), so as not to impact the other shared senders. Those affected on a Dedicated IP, only impact their own sending and will not be moved. However, depending on the severity of the issue, our team may need to revoke a customer’s ability to send any emails until full resolution. The listing will last until Spamhaus is satisfied that the offending sender has taken the appropriate steps to mitigate the problem. SBL CSS Customers are alerted of the listing with an email containing all the information needed to immediately begin the remediation process. This is part of an automated trigger listing, that allows for a customer to delist directly on the Spamhaus website, after they’ve completed remediation. Remediation steps: Customers will go to the Spamhaus IP lookup website, at https://check.spamhaus.org, where they can check on the status of their IP and continue to monitor it in real time, until it is no longer listed there. Follow the remediation and delisting instructions provided, and check for specific details in the blocklist notification email. DBL (Domain blocklisting) Customers will receive an email notification alerting of the company domain being listed. The email will contain specific information to help narrow down and identify which email source likely triggered it within Marketo. It’s important to note that any email sent from outside of Marketo, that contained the company domain, is suspect. This means, if the sender uses multiple IPs and/multiple email platforms, then any of those could be the source. Remediation steps: Follow the detailed instructions in the email, which will also provide a link to the Spamhaus Domain reputation checker webpage, to check the real time listing status of the affected domain. Once the email source is identified and cause addressed, this customer will follow the online instructions to request to be delisted. Tier II Blocklist SpamCop Impact: SpamCop is not used by any of the major North American ISPs to inform blocking decisions, but it makes it to the Tier II list because it can have a significant impact on B2B email campaigns. SpamCop is considered a Tier I one blocklist for B2B marketers but a Tier II for B2C marketers. SpamCop is a dynamic IP blocklist, that can affect a single IP or a subset of IPs Typically, the block will automatically lift within one business day, but can take longer for relisted IPs. To have triggered a SpamCop listing likely means the sender has a list management problem that should be addressed. How it works: SpamCop lists IPs for one of two reasons: Either the email hit SpamCop spam trap addresses OR A SpamCop user has reported the email unwanted. Most of SpamCop’s spam traps are previously valid addresses that have not been active for 12 months or longer. Remediation steps: If you are seeing a significant number of bouncing emails caused by a SpamCop blocked IP but aren’t sure if your email activity triggered the listing, first identify whether you are sending on a shared sender network or not. If sending from a shared IP range when this occurs, you or any other customer sending from the same network may have contributed to the IP block. This IP block will automatically get dropped within a business day. For those on a Dedicated IP that trigger a listing, refer to the above remediation steps and resources, to address the list management issue. Tier III Blocklist (Low/ No impact ) These are considered the lowest tier and therefore cause the least impact across the Marketo sender ecosystem. Some of these blocklists were more impactful at one time, while others are only impactful based on the sender region (Manitu). Others still can suddenly flare up (Lashback). There are also many blocklists that are ignored (0spam), and are not taken seriously because they do not provide any means to delist once on the list (NoSolicitado) or that they charge money to have the listing removed ( UCEPROTECT ). The pay-to-delist model is not well respected in the email industry. When using blocklist tool checkers, such as MXToolBox, many blocklists will appear, but very few are relevant. Here is our selection of Blocklists you may come across that are least impactful: Project Honey Pot SpamAssassin URIBL/SURBL DrMX PSBL 0spam HostKarma Ascams ZapBL Barracuda Trendmicro Inc. Cloudmark Proofpoint Invaluement ISP Blocklists Some ISPs use internal blocklists to make blocking decisions. Examples include AOL, Yahoo, Gmail, Outlook and Hotmail. If your IP is being blocked by one of these networks, and those networks have a large presence in your lists, a block of this kind could have a noticeable negative impact on delivery. Marketo monitors for significant ISP blocks. Those experiencing deliverability issues with emails not making it to the Inbox and bulking in the spam folder may benefit from additional services with our Email Delivery Consultants. Remediation Steps: Email Delivery Compliance Team works to resolve any ISP blocks. ISP blocks are are usually resolved or lifted within less than 24 hours of a delisting request. Customers experiencing significant blocks for Microsoft domains (outlook.com, live.com, microsoft.com), can submit a request to the delivery team to seek mitigation on their behalf. Additional Resources: Blocklist Deep Dive Abuse Report Deep Dive What is a spamtrap, or spam trap, and why does it matter? Blocklist remediation Blocklist resolution flowchart Successful lead reconfirmation What is a blocklist?

Issue You need to know the version of the munchkin script which is used by a particular web-page. Solution Munchkin version can be found by following the below steps: Open up your web browser Open developer console on your browser. Most other browsers use F12 to open developer tools. Visit the page on which the munchkin script is embedded Navigate to the network tab of the Developer console and search for munchkin You should find two attributes named “munchkin.js” and one of them will show a similar request URL as seen below munchkin.marketo.net/154/munchkin.js The numerical value 154 is the munchkin version. NOTE: If you are not able to finds anything over the network tab, we would suggest that you refresh the webpage which has the munchkin script is embedded on it

By default – when sending an email via Sales Insight, the “From Email Address” that will be used to send the email will be the user’s email address on their User Profile. As it turns out, there is actually a way to use an alternative email address for Sales Insight! DISCLAIMER: This doesn’t mean that users can select an email address to be used upon send (best to create an idea in the community!). However, it does allow emails to be sent out with a different From Address if users don’t want to use their default email address. Go to Marketo > Admin > Sales Insight. If you scroll down to the bottom of the module, you will find a Settings section with an ‘Email From Field’ field. By default, the initial and only value will be Salesforce/MSD User Email Address (depending on the native CRM integration used by the customer). This is a article attached imageThis is a article attached image In order to select an alternative email, a custom Email Address field should be placed on the User object in the CRM. To do this in SFDC: 1) Go to SFDC > Setup > Build > Customize > Users > Fields 2) Create a custom field of type Email – refer to the SFDC docs if necessary. (help.salesforce.com/HTViewHelpDoc?id=adding_fields.htm) Have the new field be visible to the Marketo Sync user. In the below example, the custom field is labelled Alternative Email: This is a article attached imageThis is a article attached image In Marketo: 1) Wait a sync cycle (or two) for the field to sync over to Marketo 2) Go to Admin > Sales Insight > Edit Settings and the custom field is now available This is a article attached imageThis is a article attached image Changing this will affect following email sends from Sales Insight. Remember, this is not a method to select email addresses on send – this will affect all sends from all users after the From Address Field is updated.

Summary You have set up a campaign or campaigns in the Email Deliverability Tool (250ok), but there is no engagement metric showing Total opens and Unique opens, which should be available in the ‘Engagement Overview’ in the Email Deliverability tool. You would need to ensure that you have configured the necessary setup for the tracking to work in the Email Deliverability tool. Issue Campaigns created in the Email Deliverability tool (250ok) doesn’t show any engagement overview metric such as total opens and unique opens. Environment Email Deliverability tool (Production/Sandbox) Solution You would need to implement the necessary setup for the metric to show in the Engagement Overview in the Email Deliverability tool (250ok) Follow the steps below to ensure you have configured the setup for campaign tracking. 1. Ensure your DNS CNAME is configured. (All that is required is creating a CNAME DNS entry on this domain that points to 250analytics.com) For more information, you can refer to this external documentation: https://www.validity.com/knowledge-base/what-are-custom-domains-in-250ok-analytics/ 2. Insert the correct tracking pixel code retrieved from the Email Deliverability tool. 3. Always utilizing the ‘c=‘ tag in your tracking code for your campaigns to ensure the tracking is measured correctly in the Email Deliverability tool. (Obviously, the CNAME above is essential to have it set up correctly). You can follow a guide on how to implement the ‘c=‘ tag and retrieve the tracking pixel is here: help.returnpath.com/hc/en-us/articles/360046308092-How-Do-I-Add-My-250ok-Tracking-Pixel- Once you have all these configuration settings, you can start tracking your campaigns which are sent via Marketo in the Email Deliverability > Engagement Overview. Root Cause Mis-configuration or no configuration made causing the campaign tracking does not work.

What is a Blocklist? Can I Still Send My Emails, or Are You Blocking Me from Sending? What Is a Spamtrap and Why Do They Matter? Can You Give Me the Spam Trap Address That Triggered the Blocklist So I Can Remove It from My Database? Can You Give Me More Information regarding the Blocklist Issue? What Is the Quarantined IP Range? I Sent This Email Campaign a While Ago. Why Am I Only Getting Notification of the Blocklist Issue Now, and Am I Still Blocklisted? The Blocklist Notification Went to the Wrong Email Address. Why Was It Sent to That Address? Which blocklists should I be concerned about? - Top Blocklists – What You Need to Know How do blocklist issues get resolved? What steps do I need to take to resolve the blocklist issue? - Blocklist Remediation

*Updated in October 2025 What is a feedback loop (FBL)? An FBL is an arrangement between an email sender, such as Marketo, and an Internet Service Providers (ISPs) or email hosting service. The FBL allows the email sender to be automatically notified when the user who receives an email marks it as spam. When a lead who uses one of these ISPs clicks the spam button for an email, the ISP sends an automated notice to Marketo. Marketo automatically unsubscribes the lead with the unsubscribe cause, "Customer Complaint Received from ISP". Marketo's Email Compliance Team also logs these complaints for internal compliance monitoring. What FBLs is Marketo enrolled in? By default, all emails sent by Marketo are covered by an FBL with the following email providers: AOL BlueTie Comcast Fastmail gandi.net ItaliaOnline Laposte.net Liberomail Liberty Global Locaweb Mail.ru Microsoft (Hotmail, Outlook, Live, MSN) OpenSRS/Tucows Rackspace Seznam.cz SFR SilverSky Swisscom Synacor Telenet Telenor Telstra Terra TIM UOL Feedback Loop Virgin Media Yahoo! Ziggo Currently Marketo does not have a method of signing up for the FBLs for QQ.com. Notably, Gmail does not offer a traditional FBL. They have a similar offering that Marketo has evaluated and determined does not meet the needs of our clients at this time. Google does offer Postmaster Tools that allow senders to monitor their complaint rate and other reputation information. Senders can sign up here: https://gmail.com/postmaster/

To enable Marketo to meet the performance demands of its customers, Marketo has a standardized Data Retention Policy used across the platform. This policy applies to the activities stored in the activity logs of people in your database. Activities and Data Retention There are three components to our data retention policy: a retention period of 14 days for one activity, 90 days for twelve high-volume activities; and a retention period of 25 months for other lead activities. Activity with Retention Period of 14 days Activities Retained for 14 Days Delete Lead Activities with Retention Period of 90 days The high-volume activities listed below will be retained for 90-days. After 90-days, these activities will be permanently deleted. Activities Retained for 90 Days Add to List Change Score Change Data Value Visit Webpage Click Link on Webpage Sync Lead to SFDC Sync Lead to Microsoft Sync Lead Updates to SFDC Update Opportunity Request Campaign Email Delivered* Send Email* * Email Delivered and Send Email activities change from 25 months to 90 days effective August 31st, 2020. More information here. Activities with Retention Period of 25 Months The activities listed below will be retained for 25 months. After 25 months, all such lead activities will be permanently deleted. The only exception is the New Lead activity, which will always be displayed in the activity log. All other activities will be deleted, but the New Lead activity will not, giving you a permanent record of when the lead was created and how. Category Activities Retained for 25 Months Web Click Predictive Content Click RTP Call to Action Fill Out Form Smart Campaign Add to Engagement Program Call Webhook Change Lead Partition Change Engagement Program Cadence Change Engagement Program Stream Change Program Success Change Revenue Stage Change Program Member Data Change Revenue Stage Manually Change Program Status Compute Data Value Enrich with Data.com Execute Campaign Interesting Moment Merge Leads Remove from List Resolve Ruleset Reward Test Group Variant Schedule Test Variants Send Alert Engagement Program Cast Push Lead to Marketo Social Click Shared Link Share Content Vote in Poll Email Click Email Email Bounced Email Bounced Soft Open Email Received Forward to Friend Email Sent Forward to Friend Email Unsubscribe Email CRM - Salesforce Add to Opportunity Add to SFDC Campaign Change Owner Change Status in SFDC Campaign Click Sales Email Convert Lead Delete Lead from SFDC Lead Assigned New SFDC Opportunity Open Sales Email Receive Sales Email Remove from Opportunity Remove from SFDC Campaign Resolve Conflicts SFDC Activity Sales Email Bounced Send Sales Email SFDC Activity Updated SFDC Merge Leads Add to Case Add to SFDC Custom Object Test (Contact) CRM - Microsoft Dynamics Add to Opportunity (Contact) Add to Opportunity (Account) Remove from Opportunity (Contact) Remove from Opportunity (Account) Update Opportunity (Contact) Update Opportunity (Account) Delete Lead from Microsoft Segmentation Add to Segment Change Segment Retaining Data Marketo’s data retention policy gives you a rolling 90-day view of certain high-volume activities and a rolling 25-month view of other lead activity data. To help prevent any actual data loss, Marketo has developed a Bulk Extract API that enables you to export this data directly if desired. Once exported, you will be able to host this information locally and utilize it in any way you deem necessary. Premium Data Retention Option Marketo offers a premium Extended Data Retention subscription option that will allow activity data to be stored for 37 months instead of the standard retention period of 25 months. The high-volume activities, however, will only be retained for 90 days even with the premium option. For more information, contact your Customer Success Manager.

When a customer triggers a blocklisting on Marketo's shared IP range that customer is moved to a set of IPs we call the quarantined IP range. We do this to protect the health of our shared network and ensure the best deliverability possible for all of our customers on that network. If you have received a Blocklist Notification from Marketo reporting that you have triggered a blocklisting your Marketo account is now in the quarantined IP range. While you are in the quarantined range it is possible that you may experience a slight decrease in your deliverability rates. The reason for this is that you are now sending from a range made up of senders that have also caused other blocklist issues. All customers have received a notice of the listing and are in the process of repairing their database. There are two ways to be removed from the quarantined IP range: Follow the steps outlined in our Blocklist Remediation article. Be sure to fill out the form referenced in the email alert to indicate that you have taken steps to mitigate the issue. Demonstrate clean sending behavior for 3 months. We remove senders from the quarantined IP range if they have not triggered any new listings in 3 months. To ensure your best deliverability rates blocklist issues should be addressed right away to prevent further damage to your sending reputation. Furthermore, if no action is taken to improve list hygiene the issue will likely recur. Marketo's Delivery and Compliance Team strongly recommend following the Blocklist Remediation steps. Additional Resources: Blocklist Deep Dive

Issue You want to understand how Company IDs work within Marketo and how you can interact with these IDs, particularly when dealing with the Person's Company Object. You want to know: The nature and standard of the Company ID in Marketo. Can the Company ID be checked or modified by users without CRM or API integration? If people belonging to the same company share the same Company ID. How to update the Company Object information via the API for multiple leads associated with the same company? Clarification on which field should be used as the basis for updating Company Object information. Solution Marketo manages Company IDs using two distinct identifiers: Company ID: This is a Marketo-specific identifier that is used to organize the link between companies and people within Marketo. External Company ID: A hidden system field used in non-native company object integrations. The Company ID can be accessed through the {{company.Id}} token, while the External Company ID is not directly viewable in the UI. Note: The Company Object API endpoints are disabled when a native CRM integration is enabled in a Marketo instance. Accessing and modifying Company ID You cannot manipulate the Company ID or External Company ID fields from the Marketo UI. Any interaction or modification of these fields must be done through the Marketo API. Updating Company Object information via API When updating the Company Object for multiple leads belonging to the same company: Use the External Company ID or company ID to update the Company Object. Updating the Company Object with the External Company ID will apply the changes to all leads associated with that company. You can also update Company Object fields using the lead API endpoints. These changes will apply to all leads associated to the company. Steps for updating Company Object Create Company: Use the Marketo API endpoint `{{base_url}}/rest/v1/companies.json` to create a company with the necessary data. Create Person: Use the Marketo API endpoint `{{base_url}}/rest/v1/leads.json` to create a person associated with the company. Field Inheritance: Once a person is linked to a Company Object via the External Company ID, certain fields like Billing City, Address, and Postal Code are inherited from the Company Object and are no longer editable from the UI. Creating Fields on the Company Object: Contact Marketo Support to request the conversion of these person fields to company fields.

Issue Why don't some emails appear as an 'Email Filter' option in an Email/Email Link Performance Report? Filter Assets in an Email Report documentation Solution The reason why some emails do not appear as an 'Email Filter' option in an Email/Email Link Performance report is because the emails were used in an A/B test. Similar to the product behaviour illustrated below, when adding an A/B test, the selected email will not be directly selectable or appear as an Email Filter option in an Email/Email Link Performance report. "When adding an A/B test, the selected email will no longer be available for use in any other program." Add An A/B Test In order to report on the A/B test emails that do not appear in the Email Filter option, the parent program can be selected.

*Updated in September 2024 Leads can be auto unsubscribed due to default Feedback Loop setup with the ISPs listed on this page. You can use the following filters to find leads that have clicked the SPAM button in your emails: Filter 1: Data Value Changed Attribute: Unsubscribe New Value: True Reason: Contains, complaint (Optional to Specify what Email Domain) Filter 2: Email Address Email Address: Contains, @domain.

*Updated in September 2024 Quick points: Spamtraps are addresses owned by antispam organizations Emailing a spamtrap can result in your sending domain or IP to be blocklisted Maintain current, direct opt-in with an active lead database to avoid this Spamtraps are usually functional email addresses that can successfully receive a message. What is a spam trap or spamtrap? A spam trap, or spamtrap is an email address secretly owned by an antispam organization that is used to detect spam. Antispam organizations do not sign up for mailing lists, so they consider any email sent to these addresses to be spam. Once an email is sent to the spamtrap, the antispam organization that owns this address can/will blocklist the IP and/or domain that sent the email. Email administrators purchase subscriptions to the data offered by blocklist providers and may use the lists to block all incoming email from listed IPs or containing listed domains. From the marketer’s perspective, this can mean a high number of bounced emails leading to low lead engagement, and ultimately to weak revenue performance. There are three types of spamtraps – pristine traps, typo, and repurposed/recycled traps. A pristine trap is an email address that was never used by a person. A repurposed trap is an email address that once belonged to someone but is no longer a valid address; these addresses will bounce as bad addresses for at least six months before an antispam organization will turn them into live traps. A typo trap will contain a misspelled domain. How can a spamtrap get into my Marketo lead database? Purchased data Purchased data is unreliable and is high risk for your brand’s sender reputation. The antispam community does not like the use of purchased data, so antispam administrators have made a concerted effort to get spamtrap addresses into the databases of data vendors. While data vendors may claim they provide opt-in data, you risk inadvertently purchasing spam trap addresses when using a data vendor. A foundational strategy to maintaining healthy sender reputation is to gather email addresses directly from individuals alongside their consent to be enrolled in bulk email communication. Sending unsolicited email is prohibited by the Adobe’s Acceptable Use Policy because this practice has a high risk of causing deliverability problems for your brand and the Adobe network. To avoid spam traps, get direct opt-in before sending email. If you have purchased data in the past, we recommend setting any inactive purchased leads to marketing suspended or simply removing them from your database. Old data Repurposed traps are email addresses that were once valid but are now owned by an antispam organization. This can happen when a company goes out of business; expired domains are often purchased by antispam organizations. Sometimes a company that has a direct partnership with an antispam organization will allow email addresses of former employees or users to become spamtraps. Because antispam organizations will generally make sure future spam traps return a bounce as bad addresses for at least six months before they become spam traps you can prevent repurposed traps in your database by emailing remaining engaged with everyone in your database at least once every six months. To safeguard your sender reputation, avoid reengagement campaigns to addresses you have not contacted in more than six months. Unconfirmed form entries People can unintentionally enter spamtrap addresses into forms either by mistyping their email or by intentionally using a fake email address that happens to be a spamtrap. If you use single opt-in, you risk adding spamtraps to your mailing list. This is more likely to happen if you are a B2C company or through the offer of gated content that requires an email address. How can I identify spamtrap addresses? Spamtrap addresses are considered trade secrets by the antispam organizations, and they are obscured by design. They do not share these addresses because their goal is for senders to change their mailing practices rather than to simply remove spamtraps from their mailing lists. That said, one thing we do know about spamtraps is that they tend to be automated processes and do not engage. Spamtraps do not click links. You can use smart list filters to identify inactive leads in Marketo. How can I prevent spamtraps in my database? Maintain active, direct opt-in for all leads Don’t purchase data Email engaged contacts least once every six months Don’t add old data directly to your mailing list Suppress perpetually disengaged contacts Grant access to assets such as free trials and whitepapers as email links to discourage intentional use of fake email addresses on forms Use scripting on your forms to identify potential typos

Issue There are discrepancies in the leads activity logs within Marketo, where the Email Delivered activity timestamp is sometimes recorded a few seconds before the Email Sent activity. This sequencing issue causes confusion for analytics teams, particularly when using external analytics platforms like Tableau, as the logical sequence would typically show that an email is sent before it is delivered. Solution Understanding email statuses and utilizing Campaign Run ID for analytics: The confusion arises from a misunderstanding of how Marketo logs email activities and the meaning behind the statuses Sent and Delivered. Email Sent Status: In Marketo, when an email status is logged as Sent, it indicates that the email has been considered for sending or queued for sending. The status does not mean the email has been physically sent through the servers but rather is prepared to be sent. The logging of this event happens shortly after the email is queued, which could be almost instantaneous. Email Delivered Status: The Delivered status is an acknowledgment from the SMTP (Simple Mail Transfer Protocol) infrastructure, signifying that the recipient's email server has accepted the email. This status is logged after the event has occurred and the email has been accepted by the remote server. It is important to note that while both statuses are recorded after their respective events, they come from different systems within the email delivery process. This can sometimes result in the Delivered status being logged before the Sent status, although such instances should be rare. To correctly analyze and interpret the email activity logs, users should adhere to the following guidelines: Recognize that the timestamps for Sent and Delivered may not always be in the expected order due to the separate systems involved in logging these events. Focus on the Campaign Run ID for analytics purposes. This ID is unique to each campaign run and can be used to accurately reassemble the sequence of events, regardless of the order in which Sent and Delivered statuses are logged.

We manage our network to provide our customers with the highest server availability and best deliverability possible. Marketo Engage has a strong anti-spam policy and a team that handles blocklist notifications in our IP space and spam complaints. We also cooperate with most major anti-spam providers and ISPs. In addition, we maintain feedback loops (FBL) for many of the most popular email providers. For more information on FBLs and ISPs with whom we have this arrangement, click here. Blocklistings are usually caused by sending mail to a spam trap email address. For an explanation on what causes blocklisting, click here. When we receive notification of a blocklisting, we react in two ways. First, we go through the procedures to remove the listing from that blocklist as soon as possible. Second, we determine (if possible) which of our customers caused the blocklisting and work with them to improve their mailing lists to prevent a reoccurrence in the future. This is usually a cooperative process, most frequently, a review of mailing policies and strategic pruning of a customer’s lead database will return them to best practices. Blocklists: Frequently Asked Questions Is this article helpful ? YesNo

If you have submitted a support case and you feel that the case was improperly handled or that the solution being offered does not meet the communicated Marketo support expectations, then we would welcome the opportunity to look deeper at your specific support engagement and work with you on delivering a better resolution. Caution: If the item you're looking to escalate is related to a Production Down incident, please call the support line for your region to receive immediate assistance. Support Manager escalations are only handled during normal business hours. The phone numbers for each region are listed below, follow the prompts for P1: Americas: +1.877.270.6586, Direct: +1.650.376.2303 Europe, Middle East, & Africa: +353 (0)1 242 3030, UK: 0800 151 3030 Asia Pacific: +61 2 8031 8188 Japan: +81.03.4233.9014 How to Escalate: Step 1. Navigate to the "Case Management" area of the support portal either by mousing over the Support tab and selecting "Case Management" or clicking the Support tab and click on the “My Case Management” button. NOTE: You will need an open or recently closed case in order to escalate to support leadership. This is a article attached image Step 2. From here you will need to click on either an open or a recently closed* case: This is a article attached image *Support Cases that have been closed for longer than 10 days are no longer eligible to be re-opened and we ask that you open a new support ticket for your current issue prior to escalating to a Support Manager. We ask that you have an open support ticket for a Support Manager to be able to address specific issues. Step 3. After selecting a case, click on the Escalate to Manager button: This is a article attached image Step 4. A pop up will display and you will need to the purpose for the escalation and click on the “Escalate” button. This is a article attached image Once your support escalation case has been submitted a Marketo Support Leader will contact you within 1 business day of your support region's support hours to address the issue.

Issue Clicking "Automatically copy over from HTML" or "Copy from HTML" in the Email Editor fails to copy the contents over to the Text Only version of the email. Solution This can occur if there are no editable sections in the email asset. By default, Marketo automatically copies the text content of any Rich Text element that’s in your email over to the Text version. Marketo defines a Rich Text element inside of an email template as a section using either mktEditable or mktoText classes. If the email's HTML does not contain either class, then no content would automatically be copied over. Here is additional documentation related to Email Text Versions: https://experienceleague.adobe.com/docs/marketo/using/product-docs/email-marketing/general/creating-an-email/edit-the-text-version-of-an-email.html?lang=en A quick workaround would be to manually copy and paste the content you wish in the Text Version, and in the future build/use templates to make emails with editable sections.

Issue Multiple alerts are sent from the same campaign. Solution Recognize that Send Alert functions at the person level, triggering an alert for each individual in a campaign. Utilize Marketo's reporting to send a consolidated notification: Create an Email or Campaign Performance report. Tailor the report settings for the specific campaign. Schedule the report to be sent after campaign completion. This method provides a summarized notification, avoiding the repetition of alerts per campaign member. Alternatively, use Send Alert for individual notifications where needed, such as: Alerting a lead owner of a form submission. Triggering personalized alerts for specific lead activities.

Issue Files uploaded to Marketo's Design Studio, like PDFs or image files, are assigned an HTTP URL instead of HTTPS. This discrepancy can trigger security warnings in emails, as modern browsers and mail clients expect secure links that match the SSL certificate's domain. Solution To address this issue, follow these steps: Ensure you have a custom landing page rather than the default domain. See under Admin > Landing Pages. Apply an SSL certificate to any new domains added. Marketo won't do this automatically. You can contact Marketo Support to request an SSL application for your domain. Provide necessary details. After SSL implementation, send test emails to check for proper HTTPS encryption and the absence of security warnings. By implementing these actions, asset URLs and landing pages in Marketo communications should be secure.

Issue Learn how to design smart campaigns using triggers and filters within the same campaign. Create a campaign that reacts to several different initiating actions or conditions, such as a change in lead status, form fills, or change in data values. Find out whether triggers and filters can be used together, how to combine them effectively, and how to apply advanced filter logic to achieve the desired workflow. Solution Marketo allows the combination of triggers and filters within a smart campaign. Triggers are considered as initiating events that start the campaign, while filters are used to further refine the selection of leads based on specific criteria. Triggers are always evaluated with an OR logic, meaning if any trigger event occurs, the campaign will consider it for further action. Filters, on the other hand, can be evaluated using AND logic, OR logic, or advanced logic, depending on the requirements. Steps for smart campaign configuration: Combining triggers and filters: In a smart list within a smart campaign, you can have multiple triggers. Each trigger is treated with OR logic, meaning if any of the triggers occur, the campaign will proceed to evaluate filters. Filters are then applied to further refine which leads or records should move through the campaign flow. By default, without advanced logic, filters are evaluated with AND logic, meaning all filters must be true for a lead to qualify. Using advanced filter logic: Advanced filter logic can be used once you have three or more filters. You cannot use advanced logic to change the inherent OR logic of triggers. Filters can be combined using AND, OR, and other complex logical conditions, but this logic applies only to filters, not to the combination of triggers and filters. Understanding the distinction between triggers and filters: Triggers are based on activities or actions, such as Data Value Changes or Person is Created. Filters are based on properties or criteria of the lead records, such as Product Interest = C or Field A = B. A trigger can only occur once per lead action, whereas filters can continuously apply to lead records based on their properties. Creating complex logic: To create a logic such as (Trigger1 AND Filter1) OR (Trigger2 AND Filter2), you would set up two separate smart campaigns or smart lists, as within a single, smart list, triggers cannot have AND logic between them or between triggers and filters. Troubleshooting smart campaigns: If a smart campaign is not running as expected, review the combination of triggers and filters to ensure the logic is set up correctly. Remember that a trigger must occur for any filters to be evaluated. Verify that the filters are correctly defined to match the leads you intend to target after the trigger event. By understanding and applying these principles, you can effectively manage smart campaigns in Marketo, ensuring that the right leads are targeted with appropriate actions based on both their activities and their attributes.

Knowledgebase

Maintaining a Directory of Leads Bouncing Emails

Top Blocklists - What You Need to Know

How to Find the Version of Munchkin Script Being Used on a Web-Page

Obscure Functionality: Using an alternative email address for Sales Insight emails

Email Deliverability Tool - Campaigns Not Being Tracked

Blocklists: Frequently Asked Questions

Feedback Loops (FBL)

Marketo Activities Data Retention Policy

What Is the Quarantined IP Range?

How Company IDs work within Marketo

Reporting on A/B Tests Emails in Email Reports

Finding Leads that are Auto Unsubscribed for Email Spam Complaints / Feedback Loop (FBL)

What is a spam trap and why do they matter?

550 Rejected by Header Based Anti-spoofing Policy

Email activity log sequence issues in Marketo

Which blocklists should I be concerned about?

How does Marketo respond to blocklisting and spam notifications?

Escalating a Support Issue

HTML Email Not Copying Over to Text Only Version in Editor

Multiple alerts sent from the same campaign

Resolving Marketo unencrypted asset URL issue

Understanding smart campaigns: Triggers and filters