Knowledgebase

Featured article

(Article Updated - August 2024) Overview A blocklist is a database of IP addresses or domains that have been associated with the sending of unsolicited commercial email or spam. Internet Service Providers (ISPs) and business email networks use information from blocklists to filter out unwanted email. As a result there can be a drop to inbox delivery rates if the IPs or domains involved with sending email are listed on a blocklist. Marketo’s Email Delivery and Compliance team monitors blocklist activity on our IPs and domains daily. When an impactful listing occurs, we reach out to the blocklist, attempt to identify the sender that triggered it, and work with the blocklist organization to get the listing resolved. There are thousands of blocklists, most will not have a significant impact on your delivery rates. Below, we have compiled a list of the blocklists that commonly appear across our sender ecosystem. Each blocklist has been grouped into a top tier (Tier I) by most impactful, to the bottom least impactful tier (Tier III). These may have little to no impact across our sender network. Tier I Blocklist Spamhaus (SBL) Impact: Spamhaus is the only blocklist that we categorize as a Tier I for a reason: it has by far the greatest impact on delivery. It is the most well-respected and widely used blocklist in the world. A listing at Spamhaus will have a negative effect on your ability to deliver emails to your customer’s inbox and can cause bounce rates of over 50%. Evidence suggests that most of the top North American ISPs use Spamhaus to inform blocking decisions. How it works: Unlike many blocklists, Spamhaus lists senders manually. This means they are proactively watching sender activity, collecting data, and base listings on a number of variables. Most commonly senders are listed for mailing to spam trap addresses that Spamhaus owns. Sometimes Spamhaus will list senders based on recipient feedback as well. Next Steps: Please note that every Spamhaus email can be quite different depending on the information provided and the nature of the listing . Because Spamhaus has multiple types of listings, the remediation steps are based on which type of blocklisting has occurred. We have listed the most common types to affect Marketo customers, from most to least impactful. Impact can range from a full block of top severity, to a partial block that is less severe (CSS Data, DBL). If remediation isn’t performed and the problem not addressed, these listings can increase in severity and turn into a full blocklisting. Spamhaus Blocklistings Types SBL (full blocklisting) Considered the most impactful. Remediation steps: Our team monitors closely for Spamhaus listings. Once alerted to the listing, we send an email notifying the customer, and reach out to the Spamhaus contact to start the remediation process. Only a Marketo delivery team member should be in direct correspondence with the Spamhaus contact, to speak on behalf of the customer, and to relay their questions and instructions, ensuring quick resolution and reduced impact. Senders that trigger this listing on a shared IP range will be moved to a more isolated, penalty range (IPB), so as not to impact the other shared senders. Those affected on a Dedicated IP, only impact their own sending and will not be moved. However, depending on the severity of the issue, our team may need to revoke a customer’s ability to send any emails until full resolution. The listing will last until Spamhaus is satisfied that the offending sender has taken the appropriate steps to mitigate the problem. SBL CSS Customers are alerted of the listing with an email containing all the information needed to immediately begin the remediation process. This is part of an automated trigger listing, that allows for a customer to delist directly on the Spamhaus website, after they’ve completed remediation. Remediation steps: Customers will go to the Spamhaus IP lookup website, at https://check.spamhaus.org, where they can check on the status of their IP and continue to monitor it in real time, until it is no longer listed there. Follow the remediation and delisting instructions provided, and check for specific details in the blocklist notification email. DBL (Domain blocklisting) Customers will receive an email notification alerting of the company domain being listed. The email will contain specific information to help narrow down and identify which email source likely triggered it within Marketo. It’s important to note that any email sent from outside of Marketo, that contained the company domain, is suspect. This means, if the sender uses multiple IPs and/multiple email platforms, then any of those could be the source. Remediation steps: Follow the detailed instructions in the email, which will also provide a link to the Spamhaus Domain reputation checker webpage, to check the real time listing status of the affected domain. Once the email source is identified and cause addressed, this customer will follow the online instructions to request to be delisted. Tier II Blocklist SpamCop Impact: SpamCop is not used by any of the major North American ISPs to inform blocking decisions, but it makes it to the Tier II list because it can have a significant impact on B2B email campaigns. SpamCop is considered a Tier I one blocklist for B2B marketers but a Tier II for B2C marketers. SpamCop is a dynamic IP blocklist, that can affect a single IP or a subset of IPs Typically, the block will automatically lift within one business day, but can take longer for relisted IPs. To have triggered a SpamCop listing likely means the sender has a list management problem that should be addressed. How it works: SpamCop lists IPs for one of two reasons: Either the email hit SpamCop spam trap addresses OR A SpamCop user has reported the email unwanted. Most of SpamCop’s spam traps are previously valid addresses that have not been active for 12 months or longer. Remediation steps: If you are seeing a significant number of bouncing emails caused by a SpamCop blocked IP but aren’t sure if your email activity triggered the listing, first identify whether you are sending on a shared sender network or not. If sending from a shared IP range when this occurs, you or any other customer sending from the same network may have contributed to the IP block. This IP block will automatically get dropped within a business day. For those on a Dedicated IP that trigger a listing, refer to the above remediation steps and resources, to address the list management issue. Tier III Blocklist (Low/ No impact ) These are considered the lowest tier and therefore cause the least impact across the Marketo sender ecosystem. Some of these blocklists were more impactful at one time, while others are only impactful based on the sender region (Manitu). Others still can suddenly flare up (Lashback). There are also many blocklists that are ignored (0spam), and are not taken seriously because they do not provide any means to delist once on the list (NoSolicitado) or that they charge money to have the listing removed ( UCEPROTECT ). The pay-to-delist model is not well respected in the email industry. When using blocklist tool checkers, such as MXToolBox, many blocklists will appear, but very few are relevant. Here is our selection of Blocklists you may come across that are least impactful: Project Honey Pot SpamAssassin URIBL/SURBL DrMX PSBL 0spam HostKarma Ascams ZapBL Barracuda Trendmicro Inc. Cloudmark Proofpoint Invaluement ISP Blocklists Some ISPs use internal blocklists to make blocking decisions. Examples include AOL, Yahoo, Gmail, Outlook and Hotmail. If your IP is being blocked by one of these networks, and those networks have a large presence in your lists, a block of this kind could have a noticeable negative impact on delivery. Marketo monitors for significant ISP blocks. Those experiencing deliverability issues with emails not making it to the Inbox and bulking in the spam folder may benefit from additional services with our Email Delivery Consultants. Remediation Steps: Email Delivery Compliance Team works to resolve any ISP blocks. ISP blocks are are usually resolved or lifted within less than 24 hours of a delisting request. Customers experiencing significant blocks for Microsoft domains (outlook.com, live.com, microsoft.com), can submit a request to the delivery team to seek mitigation on their behalf. Additional Resources: Blocklist Deep Dive Abuse Report Deep Dive What is a spamtrap, or spam trap, and why does it matter? Blocklist remediation Blocklist resolution flowchart Successful lead reconfirmation What is a blocklist?

Want to gauge how many leads clicked through a link you have in your social media or other outlets? This can be done using URL Parameters at the end of the URLs you use. Basically, you just add a little bit of code to the end of the hyperlinked URL. When leads click through and arrive at your Landing Page, that code can be captured into a hidden Form field. Here’s how to do it. Quick Overview of URL Parameters In the structure of a URL, there are two main parts. The first part is used for navigation, and the second part is used to pass data along. The two parts are separated by a question mark. For example, let’s look at this URL: www.myawesomewebsite.com?URLParameter=ThisIsAParameter The first part of the URL, “www.myawesomewebsite.com” is the main part of the URL used for navigation. The whole rest of the URL from the question mark on, “?URLParameter=ThisIsAParameter” is referred to as a querystring. It isn’t needed for navigation to the page specified, but can be used to pass the extra data you want to include. This is a article attached image The querystring contains the URL Parameters, which are used to push data into the hidden Form fields. In the querystring “?URLParameter=ThisIsAParameter” used here, “URLParameter” corresponds to the name of the parameter you use when designating the value for the hidden Form field, and “ThisIsAParameter” will be the value that is actually entered into that field. You can add additional values into additional other fields by adding those into the format of the URL separated by an ampersand like this: www.myawesomewebsite.com?URLParameter=ThisIsAParameter&URLParameter2=ThisIsValue2&URLParameter3=ThisIsValue3 In this example, you’ve got the same initial value being pushed into the first hidden field, but now two more hidden fields will store the next two values as well. The name of the parameter for the second hidden field would be “URLParameter2” and the value put into it would be “ThisIsValue2”. The third hidden field parameter name would be “URLParameter3” and the value put into this field would be “ThisIsValue3”. This is a article attached image Applying This to Social Media Use So, how does this let you track leads coming from each of your social media sources? Well, in setting up your different promotional channels, when adding the hyperlink, you can customize the URL parameter for each channel so that the values passed will input the information specific to where they came from. The parameter values will change from one social media outlet to the next, but the structure and format will stay the same. Let’s use the social media sources of Twitter, LinkedIn and Facebook as examples. Since you’re looking to identify the source of these leads, you’d likely want to name your parameter as “Source” so that it’s easily identifiable. Using the same base URL, let’s see how you’d structure the URLs. For hyperlinks placed on Twitter: www.myawesomewebsite.com?Source=twitter For hyperlinks placed on LinkedIn: www.myawesomewebsite.com?Source=linkedin For hyperlinks placed on Facebook: www.myawesomewebsite.com?Source=facebook When leads fill out the form on your landing page, the Source field will then tell you exactly where they came from! The best part, this is completely customizable and scalable. You can add more parameters and hidden fields to capture additional information like what campaign it is for. Documentation How to make form fields hidden: https://experienceleague.adobe.com/en/docs/marketo/using/product-docs/demand-generation/forms/form-fields/set-a-form-field-as-hidden How to define hidden form field value: https://experienceleague.adobe.com/en/docs/marketo/using/product-docs/demand-generation/forms/form-fields/set-a-form-field-as-hidden (Look for the section on URL Parameters in particular) Using the URL builder to generate the URLs you’ll be using: https://experienceleague.adobe.com/en/docs/marketo/using/product-docs/demand-generation/landing-pages/personalizing-landing-pages/using-the-url-builder

Setting an email to "operational" does the following No unsubscribe link automatically added Email will be sent to leads set to Unsubscribed Email will be sent to leads set to Marketing Suspended Note - when sending an operational message, Unsubscribed and Marketing Suspended leads will still be included in the "blocked from email" count on the schedule tab of the campaign. When is it OK to use the operational setting? Sending marketing email to unsubscribed addresses is illegal. For this reason, you should be extremely careful to only use this setting in extremely limited circumstances. Using this setting incorrectly violates Marketo's Terms of Service, and most antispam laws. There may be legal consequences for using this setting incorrectly. Good uses of the operational setting fall into two categories: Transactional messages Relationship messages What's a transactional message? A transactional message is part of a transaction that a lead has initiated and you are responding to. Here's some examples of transactional messages: Receipts for purchases Registration confirmations Download links in response to form fill-outs Requested assets (whitepapers, spec sheets, etc.) What's a relationship message? A relationship message describes something that affects your business relationship with the lead. Here's some examples of relationship messages: Downtime notifications Changes to terms of service Recall notices End of service notifications Operational messages should not contain any marketing content at all. In other words, do not use the operational setting to send a message that contains a receipt and a promotion, only a receipt.

What is the Email API? What is the Email API used for? What is Email 2.0? Does the Email API Work on Email 2.0 Assets? Will the Email API Break when Enabling Email Experience 2.0? How Are 1.0 Assets Upgraded to 2.0 Assets? What to Do When an Email Was Accidentally Converted to Email 2.0 format? What is the Email API? API stands for Application Programming Interface and the Email API allows an automated process to create and edit emails in Marketo. There are also other API calls that involve emails, such as Approve Snippet (assuming the Snippet is used in an Email) and Clone Program (assuming the Program contains Emails). There are also API calls to create and update Email Templates. Essentially, the API can do many things that you can also do through the Marketo user interface, but then in an automated fashion. What is the Email API used for? There are many scenarios: an external system could create Emails in Marketo using data that lives outside of Marketo. A translation service provider could clone a master Email, translate it to many languages, then save them back into Marketo as localized Emails. A reporting system could extract Emails from Marketo to use in reports that are generated outside of Marketo. An external system could Clone a Program that contains Emails, then populate the Program Tokens and schedule the Email to be sent out at a specific time. There could be an external email template creation system that creates new Email templates in Marketo through the API. What is Email 2.0? “Email Experience 2.0” is the new Marketo product feature with the enhanced email editor, documented here: https://docs.marketo.com/display/public/DOCS/Email+Editor+v2.0+Overview. It can be switched on in Admin > Email > Edit Email Editor Settings. All Emails and Email Templates also have a version number, either 1.0 (the old version) or 2.0 (the new version). If we refer to “Email 2.0 asset” we mean an email or email template in the new upgraded 2.0 format. Does the Email API Work on Email 2.0 Assets? Yes. Will the Email API Break when Enabling Email Experience 2.0? No. Enabling Email 2.0 will not automatically upgrade Emails or Email Templates to the new 2.0 format. The Email API can still create new Emails and Email Templates in the 1.0 format. However – after enabling Email 2.0 – any Email or Email Template that is created or edited and approved through the Marketo User Interface will automatically be upgraded to the 2.0 format. How Are 1.0 Assets Upgraded to 2.0 Assets? If you edit an “Approved" or “Approved with Draft” 1.0 Email with Email 2.0 enabled, the draft is converted to the 2.0 format. You can still discard the draft to go back to the approved 1.0 format. Once you approve the email and it becomes 2.0, the Email cannot be converted back to 1.0. If you edit a “Draft” 1.0 Email (never been approved), this will automatically be converted to 2.0 with no option to revert back to the 1.0 format. The same applies to Email Templates. What to Do When an Email Was Accidentally Converted to Email 2.0 format? If an Email or Email Template was accidentally converted to the 2.0 format, you’d have to copy the asset contents to a text editor, disable Email 2.0, then create a new 1.0 asset using the content that you copied.

Marketo users can configure Marketo to manage, nurture, and measure leads that are created from Google AdWords. We offer 2 options, depending on what type of web page is linked to your Google AdWords ad. Option 1: Link Google Adwords Ad to a Marketo Landing Page with a Form This solution does not require custom coding This solution does not require any additional cost Option 2: Link a Google Adwords Ad to Any Page on your Website This solution does require custom coding so that you can capture the PPC (pay per click) information when the lead comes back 'later' to fill out a form on your page Depending on whether you have resources internally to do the custom coding, this solution may or may not require additional cost Reporting Available (for both Option 1 and 2) Number of new leads acquired by Google Adwords Program Cost per new lead acquired by Google Adwords Program Number of leads acquired by keyword/search phrase Top 10 keywords/search phrases which acquired new leads Top 10 AdWords CampaignID which acquired new leads Number of Opportunities by keyword/search phrase Number of Opportunities by CampaignID Additional Reporting Available if you have Revenue Cycle Analytics/Explorer Conversion ratio of your Google Adwords Return to investment for your Google Adwords Top 10 keywords by month report which shows Average days to convert to opportunity Number of leads converted to opportunity Top 10 CampaignID’s by month report which shows Average days to convert to opportunity Number of leads converted to opportunity Program Channel report >> Google Adwords (custom channel) metrics by quarter New names, cost per new name Opportunity units, Pipeline generated, revenue, revenue to investment Learn more: Linking a Google Adwords Ad to a Marketo Landing Page with a Form Linking a Google Adwords Ad to Any Page on Your Website Google Adwords and Marketo FAQs

Issue You receive the "Subject is empty" error when attempting to approve an email which contains an emoji character in the subject line, and elsewhere in the email, emojis may fail to render. Solution Marketo can render any Unicode character up to 5.2 and any ASCII character, but this does not encompass emojis. The Marketo email editor will strip out any unsupported symbols. This is because we cannot guarantee the consistency of their appearance across platforms, as not all clients can render all emoji. Marketo only supports the text symbols that are generally then converted into emoji's by the recipient client or operating system. The basic symbols in a list such as https://www.copypastecharacter.com/symbols should work, as they are ASCII characters and not reliant on extra encoding. These are a set of accepted text symbols that will universally work on all clients and many will convert them to emoji. Just highlight the symbol from https://www.copypastecharacter.com/symbols, copy and paste it into your email. Alternately, you can work around this by q-encoding the emoji in UTF-8 format, which will render a string of code to add to your subject line. This code tells the email client to render the desired emoji. All you need to do is copy your desired emoji and run it through a Unicode to UTF-8 translation tool, such as https://onlinetools.com/unicode/convert-unicode-to-utf8. As an example, say you want to send a Happy Birthday email to a lead. You could copy the (birthday cake) emoji and run it through a translator to yield the code "=?utf-8?Q?=F0=9F=8E=82?=" Entering this code in your subject line without the quotation marks will render the emoji on the client's end, and render it in the design most compatible with their device/browser. With any email design, it's always important to test before a live send to confirm it appears the way that you expect it to.

Issue You have been receiving form submissions that appear to have bogus/nonsensical data in the fields, such as "kjsag@sm4.to" for email address, or "111-111-1111" for phone number, or in a Comment field other random nonsensical text. Solution Currently, there are no default settings in Marketo that prohibit a form submission if the required fields are filled out. A great workaround for addressing these bogus form submissions in Marketo is to implement a 'honeypot' field on the form. To do this, you will need to create a custom Marketo field, string type, and name it something distinctive (such as "spam" or "honeypot"). After creating this field in Marketo Admin > Field Management, place this new field on the form as a hidden field. Real live end-users do not see hidden fields, but spam bots will see them and fill out all available fields. So now when we see form fills with this honeypot field "not empty," we know that it was a bot fillout. Setting up the Honeypot Field Say that you have a Trigger Campaign that's having some issue with these spam/bogus form fills. In the flow of this campaign, you can add a flow step at the top: Remove from Flow, with a Choice. Choice: If Honeypot field Is not empty, then remove from flow Default: do nothing This way, the lead record is removed from the flow. You can also have other campaigns to handle these bogus form fills, such as a daily recurring batch to delete the record. Other Options Another method of dealing with bot fillouts is to enable a reCaptcha. In fact, a very prolific Marketo user has written custom code that you feasibly could use to enable a reCaptcha on the form! Check this out: https://codepen.io/figureone/pen/meybqN?editors=0110

Marketo Champions are customers who have demonstrated outstanding leadership in the Marketo Community, are experts in Marketo products, are avid contributors in the social world, and are loyal advocates of the Marketo brand. Benefits and perks our Champions receive include: Access: Meetings with our product and marketing teams to give exclusive feedback Previews: Given early previews to products, features, and releases when available Publicity: Exclusive speaking opportunities at our annual Marketo Summit and other events Networking: Special networking events with Marketo executives and fellow Champions and semi-annual conference calls Ownership: Ownership of content and exclusive activities at our annual Marketo Summit that showcase your expertise and thought leadership Credibility: Special Champion badge on Marketo Community profiles, and profiled on Marketo's corporate website Sweet Swag: Champion-exclusive swag To find out more information and apply, click here. To view a complete list of current Champions, click here. Join the Marketo Elite Today!

By default, required fields on Marketo forms show a red asterisk to indicate that they're required. Here's how you can remove or change it. Please ensure that you have access to an experienced Web developer. Marketo Technical Support is not set up to assist with troubleshooting code. Removing the asterisk The following CSS will remove the asterisk from your code. You can add this to one landing page by dragging in a Custom HTML element and pasting this in, or you can add it to your landing page template so it affects all your forms. <style type="text/css"> form.lpeRegForm li.mktFormReq label { background: none !important; } </style > Changing the asterisk To change the required symbol, you need an image that you'd like to display instead of the asterisk. It needs to be 16x16px, and ideally you should make the background transparent. Create that image, then upload it to Marketo. Get the URL for that image, then add this CSS to your landing pages: <style type="text/css"> form.lpeRegForm li.mktFormReq label { background:url('[image URL goes here]') no-repeat scroll right 0 transparent; } </style>

Issue You created a picklist field in SFDC and want to know if that field will sync down to Marketo with the field type of picklist. Solution Marketo has a picklist option in form fields, but not in Lead Database fields. When you sync a field from SFDC that has the type of picklist, this field will show in Marketo with a type of String. However, when you create a form, the field type for your field will show as "select," which is a picklist.

Issue Updating an Email Template is creating a draft for existing emails without the desired changes Solution When changes are made to an Email Template in the Design Studio that is already in use and those changes are approved, it will create a Draft for any existing Email that was created from that Template. If the draft is not reflecting changes you would like to see made, you may have included the changes within a mktEditable or Editable class <div> tag. The content within a mktEditable class element within an email template are ignored from any changes as they are considered to be "default content". Any content within these elements will not see any changes made to them based on changes to the template, and will only be seen when creating a new Email asset. You can update an editable section to remove it's editable status, however this will remove any changes to the content done in any email. You can see which elements can be classified as Editable here: https://docs.marketo.com/display/public/DOCS/Email+Template+Syntax

Issue Is there a way to prevent opening a new browser window when a mailto/email address link in an email is clicked? Solution The reason why the link clicked in an email redirects to a new browser window occurs is because the link is a tracked link. As per design of Marketo tracked links, they are required to be loaded in a browser first which is why the mailtolink/email address clicked is loading in the browser first. If you wish to load the link clicked in the same window and not redirect to a new browser window, you will need to disable tracking on the link. https://docs.marketo.com/display/public/DOCS/Disable+Tracking+for+an+Email+Link

Issue How to use tokens to personalize some of the information displayed in a Marketo form. Solution It is possible to use Marketo tokens in the following form elements: Field Labels - Edit a Field Label in a Form Hint Text - Add Hint Text to a Form Field Tooltip Instructions - Add Tooltip Instructions to a Form Field Fieldset Text - Add a FieldSet to a Form Rich Text boxes - Add Rich Text to a Form

Issue What is the difference between mktNoTrack and mktNoTok? Solution Adding the mktNoTrack class to an email link tells Marketo not to add a tracking link to the URL. Without the tracking link, the recipient is not redirected through the tracking server before going to the target URL. Use this when you specifically don't want to track Clicked Link in Email events in the Marketo database. Adding the mktNoTok class to an email link tells Marketo not to add the _mkt_tok parameter to the target link. Used when the target link does not behave properly, for example, a mailto: link that should not have extraneous URL info or a static file that won't download when there are query parameters. The click activity will still be tracked, but the associated lead info will not be carried onto the page for use in functions such as form prefill.

Issue You are experiencing slow processing of campaigns, smart lists, and reports. Solution There are three key components that can slow down an instance: Number of trigger campaigns: Trigger campaigns are always on, always listening. If there are 50 campaigns triggering at the same time, all the 50 triggers will be in queue, slowing down your processing and routing inside Marketo. Solution: Reduce the number of Triggers. Convert some of the triggers to batches: Batches also run all the flow steps for every lead at once, instead of serially, which reduces total processing time. Complexity of smart lists: The more complex a smart list, the harder it is for the system to figure it out, which increases backend processing and even creates campaign failures from timeouts. Solution: Reduce the number of nested smart lists called in a smart list. Whenever you ask Marketo to call another Smart List, it has to wait until all of the other smart lists finish, before putting together the final counts. Instead of Marketo looking for the list and running it, just put the filters in the trigger itself. Volume of Leads: With regular cleaning and good systems design, it is fairly easy to keep your system running fast. Reduce the number of leads that can flow through with filters. Clean up the inactive leads at regular intervals.

Issue You see a popup that says 'Limited Access' when you attempt to edit or delete an asset in the Design Studio, even though you should have the required permissions/privileges for the workspace it is located in. Solution When an asset is shared from one workspace to another, only the original copy can be edited or otherwise modified, even if you have permissions for every workspace it appears in. If you attempt to alter the asset inside one of the folders it has been shared to, you will see a popup informing you that you don't have sufficient privileges to do so. To edit the asset, make sure you are working with the original copy of that asset, located within the workspace where it was first created. Who This Solution Applies To People using Workspaces

This is a article attached image Upon signing a contract with Marketo you are provisioned a Marketo instance and a Support Service. There are four different types of Support Services which are available to meet different customer support needs: Online (Legacy) Business or PREMIER SUPPORT BUSINESS (Legacy) Premier or PREMIER SUPPORT ENTERPRISE (Legacy) Elite or PREMIER SUPPORT ELITE Each Support Service has a different Service Level Target (SLT). An SLT is the amount of time Marketo Support targets to make first contact with you after a support case has been submitted. SLTs differ for each Support Service and priority level. Priority levels range from Priority P1 to Priority P4. Here are the SLTs and priority levels for each Support Service: Priority Online (Legacy) Business PREMIER SUPPORT BUSINESS (Legacy) Premier PREMIER SUPPORT ENTERPRISE (Legacy) Elite PREMIER SUPPORT ELITE P1 1 hour 1 hour 1 hour 30 minutes 30 minutes 30 minutes 15 minutes P2 4 hours 3 hours 2 hours 2 hours 1 hour 2 hours 30 minutes P3 6 hours 5 hours 4 hours 4 hours 2 hours 2 hours 1 hour P4 3 days 1 day 1 day 1 day 1 day 1 day 1 day Here are the descriptions for each priority level: Priority Description P1 Mission Critical: Core business function down or potential loss of mission critical data P2 Urgent: Major feature or workflow is not functioning. Mission critical workflow and majority of user community is not blocked P3 Important: Normal usability or task completion is impacted but functional, or workaround is available P4 Minor: Minor issue requiring a correction. Normal workflow is not impacted Find more information About Support here!

Issue The URL for the landing page shows as "https" even though you do not have SSL set up on your Marketo instance, causing the browser to display a "Not Secure" warning. Solution This can happen if the primary domain and DNS are SSL secure, but Marketo is not. For instance, if your primary domain is "https://www.mycompany.com" (SSL secure) then the DNS, which is also SSL secure, will push down the "https" transfer protocol down to all the CNAMEs on that DNS. This will force the Marketo landing page using the CNAME to use "https" in the URL, even though it is not secure. There are two ways to resolve this: Work with your IT department to see if there is a non-SSL option for your DNS Purchase SSL for your Marketo instance so that both your primary domain and your Marketo pages are SSL secure. If you would like to add SSL to your Marketo instance, please contact your Account Manager to see about adding that to your subscription.

Knowledgebase

Maintaining a Directory of Leads Bouncing Emails

Top Blocklists - What You Need to Know

Tracking Lead Sources Using UTM Parameters

Operational Emails - Important Information

Email 2.0 and Email API FAQ's

Marketo and Google Adwords Overview

Using Emojis in Marketo Emails

Dealing with Spam or Bot Form Fillouts

Marketo Champion Program

How to Remove or Change the Required Field Asterisk

Customer User Guide - Marketo Customer Support Links

Picklist Field Type in SFDC and Marketo

Email Template Updates Not Reflected in Existing Emails

Mailto Link Clicked in Email Opening New Browser Window

Moving Design Studio Assets to a New Instance

Using Tokens in a Form

The Difference Between mktNoTrack and mktNoTok

Marketo Running Slow

Unable to Edit or Delete Shared Design Studio Assets

Service Level Targets (SLT)

Browser Displays Not Secure Warning When Viewing Marketo Landing Pages

Adding a Marketo Form to an Email