Knowledgebase

Sort by:
If you have submitted a support case and you feel that the case was improperly handled or that the solution being offered does not meet the communicated Marketo support expectations, then we would welcome the opportunity to look deeper at your specific support engagement and work with you on delivering a better resolution. Caution: If the item you're looking to escalate is related to a Production Down incident, please call the support line for your region to receive immediate assistance. Support Manager escalations are only handled during normal business hours. The phone numbers for each region are listed below, follow the prompts for P1: Americas: +1.877.270.6586, Direct: +1.650.376.2303 Europe, Middle East, & Africa: +353 (0)1 242 3030,  UK: 0800 151 3030 Asia Pacific: +61 2 8031 8188 Japan: +81.03.4233.9014 How to Escalate: Step 1. Navigate to the "Case Management" area of the support portal either by mousing over the Support tab and selecting "Case Management" or clicking the Support tab and click on the “My Case Management” button. NOTE: You will need an open or recently closed case in order to escalate to support leadership. This is a article attached image   Step 2. From here you will need to click on either an open or a recently closed* case:   This is a article attached image   *Support Cases that have been closed for longer than 10 days are no longer eligible to be re-opened and we ask that you open a new support ticket for your current issue prior to escalating to a Support Manager. We ask that you have an open support ticket for a Support Manager to be able to address specific issues. Step 3. After selecting a case, click on the Escalate to Manager button:   This is a article attached image     Step 4. A pop up will display and you will need to the purpose for the escalation and click on the “Escalate” button.   This is a article attached image   Once your support escalation case has been submitted a Marketo Support Leader will contact you within 1 business day of your support region's support hours to address the issue.
View full article
Issue When retrieving result sets from the /rest/v1/activities.json end-point using a Paging Token, the result set returned by the API appears to be less data than what is in the Marketo UI. In this scenario, we're going to explore how and why Paging Tokens work when utilizing them in REST API calls. SCENARIO Say we wanted to grab all 'Send Email' activities (activityType = 6) that have occurred since 2024-04-12T12:00:00Z, and we're planning to pull these activities every two hours, and increment our paging token every two hours prior to making the /activities.json call to obtain the latest data. Current Time Apr 12, 2024, 8:00:00 AM (MST) == 2024-04-12T14:00:00Z What We Want 1. Retrieve all Send Email activities SINCE  Apr 12, 2024, 6:00:00 AM (MST) == 2024-04-12T12:00:00Z We would start by retrieving our Paging Token with the sinceDateTime parameter = 2024-04-12T12:00:00Z: /rest/v1/activities/pagingtoken.json?sinceDatetime=2024-04-12T12:00:00Z Our response would contain the nextPageToken representing the sinceDateTime: { "requestId": "1607c#14884f3e74e", "success": true, "nextPageToken": "RW6ZK46LKV36BMJ2QARX3BFZHQNHRVPPEW4IZVEELI45V2OH6RCA====" } We would then pass that nextPageToken into our GET /rest/v1/activities.json end-point, as well as our activityTypeId = 6 to target all 'Send Email' activities that have occurred since 2024-04-12T12:00:00Z. /rest/v1/activities.json?nextPageToken=RW6ZK46LKV36BMJ2QARX3BFZHQNHRVPPEW4IZVEELI45V2OH6RCA====&activityTypeIds=6 After paging through all of the results (now leveraging the returned nextPageToken from the /activities.json end-point to page through all results), we've returned 15,000 Send Email activities.      PROBLEM We know that, from our Marketing team, that we were expecting ~20,000 email sends since 2024-04-12T12:00:00Z. So why does the result set appear to be missing 5,000 records? Let's examine this further. 'Send Email' activities aren't committed to the Marketo database until the message has successfully been sent from our mail servers. Prior to that, the email is queued, awaiting it's launch to it's receiving mail server. This can present a delay from the time the email is sent, to when the activity is recorded to the Marketo database. For example, say there were two campaigns sending 10K emails each: First Campaign Send: 2024-04-12T12:30:00Z (30 minutes after our sinceDateTime token) Second Campaign Send: 2024-04-12T13:45:00Z (110 minutes after our sinceDateTime token, 10 minutes prior to when the call was made) While the first campaign send is most likely accounted for in the database (Send Email activities have been committed), Campaign #2 is still processing and sending out all 10K emails in the background. For this scenario, Marketo has only committed 5K out of 10K email sends to the database at the time the call was made. Without noticing the missing data, you repeat this process two hours from now, incrementing your sinceDateTime token by two hours as well, assuming you'll get all the new Send Email activities for the past two hours. This would now lead to you missing the 5K Send Email activities that were still being processed, but not yet committed to the database. SOLUTION The nextPagingToken returned in the /activities.json end-point is position based, and can only pull data that has been committed to the Marketo database, which inherently changes as records are being processed. If, for instance, you made the original /activities.json call at (Apr 12, 2024, 8:00:00 AM (MST) == 2024-04-12T14:00:00Z), and used the same sinceDateTime token 5-10 minutes later (Apr 12, 2024, 8:10:00 AM (MST)), you would now notice that campaign #2 has fully finished it's processing AND committed the 'Send Email' activities to the Marketo database with dateTime stamps less than Apr 12, 2024, 8:00:00 AM (MST). So, what's the best way to ensure you're retrieving all the data? Solution #1 Increment your sinceDateTime token based on the MAX(created_at) dateTime returned in the latest result set, rather than incrementing it based on an interval (every two hours). This would help ensure you're not missing records that were processing, but not yet committed to the Marketo database. Solution #2 If the data you're retrieving does not need to be live, we would recommend using the Bulk Extract API to pull this data at a lower frequency (such as twice per day 12AM & 12PM). This would greatly decrease the chances of missing records that weren't committed to the database.
View full article
Issue: I am looking for the ID to one of my campaigns for a SOAP API project I am working on. Solution: The ID can be found in the URL of the campaign. 1.1 Log into Marketo, under Marketing Activities, find and select the campaign in question. This is a article attached image 1.2 The URL to the campaign will look something like: This is a article attached image   The Campaign ID is between "SC" and "A", in the above example it's "1150". This is a article attached image  
View full article
  What is the Email API? What is the Email API used for? What is Email 2.0? Does the Email API Work on Email 2.0 Assets? Will the Email API Break when Enabling Email Experience 2.0? How Are 1.0 Assets Upgraded to 2.0 Assets? What to Do When an Email Was Accidentally Converted to Email 2.0 format?     What is the Email API? API stands for Application Programming Interface and the Email API allows an automated process to create and edit emails in Marketo. There are also other API calls that involve emails, such as Approve Snippet (assuming the Snippet is used in an Email) and Clone Program (assuming the Program contains Emails). There are also API calls to create and update Email Templates. Essentially, the API can do many things that you can also do through the Marketo user interface, but then in an automated fashion.     What is the Email API used for? There are many scenarios: an external system could create Emails in Marketo using data that lives outside of Marketo. A translation service provider could clone a master Email, translate it to many languages, then save them back into Marketo as localized Emails. A reporting system could extract Emails from Marketo to use in reports that are generated outside of Marketo. An external system could Clone a Program that contains Emails, then populate the Program Tokens and schedule the Email to be sent out at a specific time. There could be an external email template creation system that creates new Email templates in Marketo through the API.     What is Email 2.0? “Email Experience 2.0” is the new Marketo product feature with the enhanced email editor, documented here: https://docs.marketo.com/display/public/DOCS/Email+Editor+v2.0+Overview. It can be switched on in Admin > Email > Edit Email Editor Settings. All Emails and Email Templates also have a version number, either 1.0 (the old version) or 2.0 (the new version). If we refer to “Email 2.0 asset” we mean an email or email template in the new upgraded 2.0 format.     Does the Email API Work on Email 2.0 Assets? Yes.     Will the Email API Break when Enabling Email Experience 2.0? No. Enabling Email 2.0 will not automatically upgrade Emails or Email Templates to the new 2.0 format. The Email API can still create new Emails and Email Templates in the 1.0 format.  However – after enabling Email 2.0 – any Email or Email Template that is created or edited and approved through the Marketo User Interface will automatically be upgraded to the 2.0 format.     How Are 1.0 Assets Upgraded to 2.0 Assets? If you edit an “Approved" or “Approved with Draft” 1.0 Email with Email 2.0 enabled, the draft is converted to the 2.0 format. You can still discard the draft to go back to the approved 1.0 format. Once you approve the email and it becomes 2.0, the Email cannot be converted back to 1.0. If you edit a “Draft” 1.0 Email (never been approved), this will automatically be converted to 2.0 with no option to revert back to the 1.0 format. The same applies to Email Templates.     What to Do When an Email Was Accidentally Converted to Email 2.0 format? If an Email or Email Template was accidentally converted to the 2.0 format, you’d have to copy the asset contents to a text editor, disable Email 2.0, then create a new 1.0 asset using the content that you copied.
View full article
Issue Clearing cache and cookies in your browser will fix a number of different problems related to page display, browser errors, and login issues.     Solution Here are links to the support articles on how to clear cache and cookies for the most commonly used browsers. Chrome Clear cache and cookies - Computer - Google Account Help   FireFox How to clear the Firefox cache | Firefox Help   Internet Explorer https://support.microsoft.com/en-us/help/278835/how-to-delete-cookie-files-in-internet-explorer   Microsoft Edge Microsoft Edge, browsing data, and privacy – Microsoft privacy    
View full article
Summary This article explains why certain Company fields show up on the Person/Lead Object when you do a describe API call to Marketo. Issue When making the Describe call on the Lead object in Marketo (/rest/v1/leads/describe.json),  several Company object fields are returned along with the Lead object fields.   Environment Marketo REST API Solution This is expected behavior. Users can utilize the Describe Leads call to retrieve a full list of the fields available for interaction via the REST API. Several areas within Marketo treat custom Company fields as though they were on the Person/Lead object. For example if you were doing a Bulk Import, you can target the Company and Person/Lead fields and you have the ability to update Company field values as if you were changing it manually on a Person record in the UI.   Root Cause This is expected behavior, due to how the Describe call retrieves all 
View full article
Issue Customers may run into limitations with Webhook providers or other third party REST services that require their fields are an integer type field.  This may present issues with those values being inputted to Marketo (and other systems) accurately if a record has a value outside of the integer value limitation range: -2147483647 to 2147483647   Environment Marketo/Third Party REST/Webhook Providers Solution There is no way to increase/modify the integer value limitations on the Marketo side.  This is not a Marketo product limitation, it's the defined constraints of Integer data types. If you're running into issues with values from a third party/webhook provider falling outside of the limitation range, this will present issues with the field value being accurately logged in Marketo. In this scenario, it's worth checking with the third party/webhook provider to see if they have any flexibility around which field types they can allow (for example, String or Float type fields have less limitations and will allow for larger or smaller numbers outside of the -2147483647 to 2147483647 range). For a full overview of Marketo field limitations, you can visit the below article: Marketo Field Limits by Field Type
View full article
Adobe Marketo offers a number of ways to contact Marketo Support directly for assistance from our different support regions. Further details about your Adobe Success Plan can be found HERE. Note: If your Marketo Instance and Users have been migrated to Admin Console, refer to this Admin Console Overview page for managing the Adobe entitlements across your organization and to engage Marketo Support.   Marketo Support Portal (https://support.marketo.com)   The Marketo Support Portal features a web form to submit support cases to Marketo Support. The form provides Authorized Support contacts the ability to provide details on the support issue that allows Marketo Support to efficiently and effectively assign your case to the best suited available support engineer. We encourage you to leverage our Best Practices when submitting your case to Marketo Support.   Support Services – Regions, Hours, and Languages Authorized Support contacts can engage Marketo Support by calling one of our Adobe Enterprise Phone Numbers for your region. Live Telephone and Online Technical Support Priority 1 incidents: 24x7x365 via phone or online support case Priority 2-4 incidents: Support available during regional business hours via chat or online support case. Regional Business Hours Applicable regional business hours are based on the billing address in the Sales Order or purchasing documents. If Adobe is contacted for support by someone other than the designated Named Support Contacts, Adobe may request that that the support case be resubmitted by a Named Support Contact. Languages Japanese language support is available during Japanese regional business hours, excluding holidays or Adobe days off. Japanese support is not available for Adobe Commerce. With the above exception, all Support will only be provided in English. Support Access Customer will grant Adobe Support access to applicable customer systems via remote support tools controlled by Adobe for the purpose of troubleshooting and support services. Regional Business Hours for Support Applicable regional business hours are based on the billing address in the Sales Order or purchasing documents.   Americas Europe, Middle East & Africa Asia Pacific Japan 6 am – 5:30 pm 9 am – 5 pm 9 am – 5 pm 9 am – 5 pm  
View full article
Issue When using the [mktorest.com/rest/asset/v1/emailTemplates.json] end-point to pull all Email templates, the COUNT is much less than what is shown in Marketo's Design Studio Global Search.   Solution This is the expected behavior. When viewing the total count of Email templates in the Design Studio UI, it will count EACH shared template that is shared across other workspaces, counting the same template multiple times depending on how many workspaces it's shared to. However, when retrieving the Email Templates from the REST API, it will only return DISTINCT Email Template ID's from the originating shared workspace where the template resides. It will not return the templates from the shared workspaces. Root Cause REST API Expected Behavior
View full article
Issue When using the GET Activities API with a specific list Id in the parameter, the response will get all the specified activities from other assets as well. This is the endpoint for this article.     Solution Instead of using list Id (listId) as a parameter, change that to asset Ids (assetId) in the API call. The Asset ID (assetId) is the Id of the primary asset for an activity. Then, the response will narrow down the activities associated to the primary asset by looking up the Id during the call.
View full article
Issue Users for your Marketo instance are unable to log into the instance. Solution Check your landing page URLs and email links. If these are also unavailable, your Marketo instance may have been shut off. Marketo Support can confirm whether your instance has been deactivated, but are not able to reactivate it.  In this situation, please contact your Marketo Account Representative to discuss the status of the instance and regaining access.        
View full article
Issue Issue Description API Only user is not appearing when creating a service in [Admin > LaunchPoint]     Solution Issue Resolution It is highly likely that the reason why the API user was not appearing because it did not have "API Only" ticked. This can be checked in [Admin > Users & Roles > User > Edit User]. However, this cannot be modified once the API user is created, so in order for the API user to appear in LaunchPoint, "API Only" must be ticked when the API user is created.    Reference: Create an API Only User Role   Who This Solution Applies To Admin users
View full article
Issue Would a requested campaign via API show in activity log if filtered? Ex: You request a campaign, and the lead does not qualify due to a filter. Will the activity log show the request occurring?     Solution Yes, the request will show no matter if the lead runs through the flow or not. The request campaign action will be recorded, but the lead will not go through the flow steps if they do not meet the requested campaign's Smart List requirements.  
View full article
Issue Issue Description When a lead is created through an API call, the Reason and Source attributes say "Web Service API" with no further detail.       Solution Issue Resolution As described in the doc here, https://docs.marketo.com/display/DOCS/Understanding+System+Managed+Fields, "Source" and "Reason" fields are managed by Marketo: Web Service API for Original Source Type means Person was discovered by a web service API. For Registration Source Type, it states that Person was created via SOAP/REST API When a lead is created via API, no additional "Source" or "Reason" is provided to Marketo. A possible workaround is to create a custom field and populate it as needed through the API.    
View full article
Note: Once you have migrated to Admin Console, you can manage your support cases through the feature provided in the Admin Console Platform. To learn more, visit: https://experienceleague.adobe.com/docs/customer-one/using/home.html. Once you have submitted a case to Marketo support, we provide a simple way of staying connected to your case and the cases submitted from your company through the Marketo Support Portal. You can access the support portal through your Marketo instance by selecting Community in the top right corner: This is a article attached image You can also access the support portal directly at https://support.marketo.com and login with your Marketo credentials (login and password). This will not work for users with SSO.   Once you are in the support portal you can Create a Case for Marketo Support or you can also review any cases that are open and being worked on by support or review your case history. Navigate to My Case management: This is a article attached image From the My Cases navigation you can access the following case views: This is a article attached image My Recent Cases* - Cases that you have opened in the past 30 days All Company Recent Cases* - Cases that any authorized support contact has opened in the past 30 days My Open Cases – Cases created by you that are being triaged by Support and pending Support’s response and are more than 30 days old My Closed Cases – Cases that were created by you and are now closed My Awaiting Fix Cases – Cases that were created by you where Marketo is developing a fix which will be implemented at a later date All Company Closed Cases – Cases that were created by you or your colleagues that are now closed All Company Open Cases - All open cases submitted for the account Company Awaiting Fix Cases – Cases that were created by you or your colleagues where Marketo is developing a fix which will be implemented at a later date Management Escalations - Escalations opened by you or your colleagues  Survey Cases - Surveys that are available for you to fill out after a case is closed *Cases that have been opened for more than 30 days will move from Recent cases to Open cases   To view specific case details, click a case number. This is a article attached image From the Case Details, you can perform the following: Close your Case - Select the "My Case is Resolved" button to close your case Add Comments - Provide additional comments to support or respond to a Support question Add Attachment - Provide any screenshots or documents that will help illustrate the issue you are reporting   If your case has been closed there are two options available to you.   Reopen - You can reopen your case if you are not satisfied with the case resolution by adding a comment in the case. Case Survey - Once your case has closed, please consider offering feedback on the level of Support you received.
View full article
Summary Estimating the external storage requirements for your Marketo Engage Database Issue I want to extract all of my data from Marketo Engage and store it. How much storage space will I need? Environment Marketo Engage and External Systems Solution Summary There is no repeatable method to accurately estimate the amount of storage you will need to extract and store your Marketo Engage database. Standing in the way of good estimation is data availability, field selection, and storage method. Any accurate estimate will take into account the potential sizes of each type of data and their quantities (known to data scientists as "facts and dimensions"). Determining ranges for these values takes a lot of preparation and may require a high level of skill. IMPORTANT NOTE: Estimating Database size is hard so any estimate used to make business decisions should be made in cooperation with a database or application architect or other qualified professional. Scope Some information won't be extracted. Information about anonymous leads, for example, cannot be extracted. Some of the data that can be extracted may not be needed at all. Selecting the right data for your needs is the best practice as it reduces the required storage and leads to a more efficient extraction process. Field Definitions How the fields are defined in the target system will affect how big the stored data is. Depending on your storage format, padding may play a role in the size of your extracted database. As an example, the "Country" field in Marketo is a string of up to 255 characters. You could chose to store 255 characters for every country value. Or you may choose a format that uses a variable amount of space. You might also know that the longest country name is "the United Kingdom of Great Britain and Northern Ireland" meaning that 199 of those characters will always be extra so you truncate the value from Marketo storing the first 56 characters only. Each choice will have an impact on the size of your extracted database. Estimating 199 unnecessary characters per lead and making similar decisions for other fields will add up to increased storage requirements and slower extraction time. Format Once the desired data is identified, the next step is to extract, transform and load (ETL) the data from Marketo Engage into your storage system. The data returned by Marketo's API is plain old text which is usually formatted as JSON or CSV. For the information to be useful, you will transform it from JSON into the format necessary for your storage system. That format could be an Excel spreadsheet, Microsoft SQL database or a schema-agnostic database like Azure Cosmos DB. How the data is formatted and encoded will make a big difference in the amount of storage needed. Take this simple example: a Microsoft Excel spreadsheet with "Marketo Engage" in cell A1. I saved that same file in four different formats which resulted in files ranging from 1 KB to 25 KB. The format you store you information in may have a bigger impact on your final storage requirement than the data itself. This is a article attached image   To help illustrate the impact of the storage system, take a look at this guide for Microsoft SQL Database size estimation: https://docs.microsoft.com/en-us/sql/relational-databases/databases/estimate-the-size-of-a-database  Functionalization Once you've extracted your data, what are you going to do with it? Archiving your data (simply storing it) is easiest and comes with the fewest contraints. A compressed archive (Zip file) will save dramatically on storage space at the cost of functionality and ease of use. Functionalizing your data (using it in an application) requires more: at least better speed and searchability: typically a relational database. An application will often require additional data and that will need to be accounted for too. Facts and Dimensions: Do the Math It's a lot of work to get to this stage. Once you've determined how your extracted data will be stored, you can set upper and lower bounds on the sizes for each object type extracted (lead, email, activity, etc). These are your facts. Then multiply those values by the number of each type of record. These are your dimensions. Add to that the overhead of your target storage system and its functional requirements to generate your final estimates.    
View full article
Issue How to use the REST API to check for deleted leads. Solution You would need to use the specific endpoint This will pull a list of leads deleted within a specific timeframe.  Deletions older than 14 days may be pruned.      
View full article
Marketo Support's Mission is: To provide fast and friendly world-class support through creative, flexible solutions to empower Marketo Automation Software success.   Areas of Responsibility: Technical Support Engineers (TSEs) are your initial point of contact for any technical questions or concerns. TSEs are responsible for troubleshooting issues within your Marketo instance and common include:   My Marketo Marketing Activities Design Studio Lead Database Analytics Revenue Explorer (RCA/RCE) Calendar Deliverability Tools Search Engine Optimization (SEO) Web Personalization (RTP) Admin Community   Our TSEs are not web developers and as a result they are unable to troubleshoot most types of custom coding (ie. HTML, JavaScript, XML, etc.). Our support team is able to help with the following types of non-custom code:    Simple Munchkin Code Asynchronous Munchkin Code Asynchronous jQuery Munchkin Code SOAP API REST API   Our TSEs are here to assist you and our support commitment to our customers is to always work towards providing an above and beyond support experience.   Note: Our team is not against looking at custom code and, based on the subject matter expertise, our TSEs might be able to offer suggestions and recommendations, but we do want to make it clear that they are not responsible for fixing or updating any custom code that has been implemented.   Response Time   Our TSEs are bound to responding to your cases and issues within the Service Level Agreements from your account's level of support services.  We track response milestones to ensure that your cases are being handled in a timely manner as dictated by our agreed to Service Level Targets.
View full article
Issue Executing a GET API call to retrieve a list of available activity types in the target instance using the '/rest/v1/activities/types.json' endpoint, resolves with an unexpected attribute name for a field with the display name ID in the context of Marketo Custom Objects. An example of that may be a Marketo Custom Object with the following name: '3 to be', as can be shown in the image below: One of the '3 to be' Marketo custom object fields name is 'ID'. (highlighted in red). When performing a GET API call using the '/rest/v1/activities/types.json' endpoint, you will be getting a list of available activity types in the target instance, along with associated metadata of each type, however for a Marketo custom object with an ID field name, you may see it returns back with a slightly different name, in this case, it would be returning the following output for my test Marketo Custom Object activity: { "id": 100019, "name": "Add to 3 to be", "primaryAttribute": { "name": "3 to be ObjRef", "dataType": "integer" }, "attributes": [ { "name": "3 To Be Person Id", "dataType": "integer" }, { "name": "ID (3)", "dataType": "string" }, { "name": "Linkfield4", "dataType": "string" } ] } ], Here's an image of what it may look like when making the call using POSTMAN: In fact, the character in the brackets next to the ID field represents the very first character of your Marketo Custom Object name.    Environment Customers who have Marketo Custom Objects where one of the custom object fields is named 'ID'. Solution If this is interrupting your business, you may want to select a different name for the ID field under your Marketo Custom Object. (ie. ID number, Transaction ID etc.) Root Cause This behavior is expected and is a result of the 'ID' field being a unique field in the context of Marketo custom objects world and while it may be possible to create a Marketo Custom Object field with the name 'ID', it may be better to give it a distinct name that will be better describing what kind of ID field it is.   
View full article
Issue Per our developer page: https://developers.marketo.com/rest-api/assets/programs/#update, it is possible to update tags on your existing program When updating a program tag within an existing program, you may encounter an error below given the tag and its values are correct.  {"code": "709","message": "Required tags are mandatory"}]} Environment Any API clients when performing the Web Service API Solution The workaround is to have the tag updated via the UI. Root Cause "Updating tags is a destructive operation." Any attempt to update the tags of a program must include valid values for all of the required tags for a program. Unless the 'specific' tag type you are working on is the only required tag type in the instance, then that is possible to update it using the API. Otherwise, you'll encounter the error above as it is a system behaviour.
View full article