Knowledgebase

Featured article

(Article Updated - August 2024) Overview A blocklist is a database of IP addresses or domains that have been associated with the sending of unsolicited commercial email or spam. Internet Service Providers (ISPs) and business email networks use information from blocklists to filter out unwanted email. As a result there can be a drop to inbox delivery rates if the IPs or domains involved with sending email are listed on a blocklist. Marketo’s Email Delivery and Compliance team monitors blocklist activity on our IPs and domains daily. When an impactful listing occurs, we reach out to the blocklist, attempt to identify the sender that triggered it, and work with the blocklist organization to get the listing resolved. There are thousands of blocklists, most will not have a significant impact on your delivery rates. Below, we have compiled a list of the blocklists that commonly appear across our sender ecosystem. Each blocklist has been grouped into a top tier (Tier I) by most impactful, to the bottom least impactful tier (Tier III). These may have little to no impact across our sender network. Tier I Blocklist Spamhaus (SBL) Impact: Spamhaus is the only blocklist that we categorize as a Tier I for a reason: it has by far the greatest impact on delivery. It is the most well-respected and widely used blocklist in the world. A listing at Spamhaus will have a negative effect on your ability to deliver emails to your customer’s inbox and can cause bounce rates of over 50%. Evidence suggests that most of the top North American ISPs use Spamhaus to inform blocking decisions. How it works: Unlike many blocklists, Spamhaus lists senders manually. This means they are proactively watching sender activity, collecting data, and base listings on a number of variables. Most commonly senders are listed for mailing to spam trap addresses that Spamhaus owns. Sometimes Spamhaus will list senders based on recipient feedback as well. Next Steps: Please note that every Spamhaus email can be quite different depending on the information provided and the nature of the listing . Because Spamhaus has multiple types of listings, the remediation steps are based on which type of blocklisting has occurred. We have listed the most common types to affect Marketo customers, from most to least impactful. Impact can range from a full block of top severity, to a partial block that is less severe (CSS Data, DBL). If remediation isn’t performed and the problem not addressed, these listings can increase in severity and turn into a full blocklisting. Spamhaus Blocklistings Types SBL (full blocklisting) Considered the most impactful. Remediation steps: Our team monitors closely for Spamhaus listings. Once alerted to the listing, we send an email notifying the customer, and reach out to the Spamhaus contact to start the remediation process. Only a Marketo delivery team member should be in direct correspondence with the Spamhaus contact, to speak on behalf of the customer, and to relay their questions and instructions, ensuring quick resolution and reduced impact. Senders that trigger this listing on a shared IP range will be moved to a more isolated, penalty range (IPB), so as not to impact the other shared senders. Those affected on a Dedicated IP, only impact their own sending and will not be moved. However, depending on the severity of the issue, our team may need to revoke a customer’s ability to send any emails until full resolution. The listing will last until Spamhaus is satisfied that the offending sender has taken the appropriate steps to mitigate the problem. SBL CSS Customers are alerted of the listing with an email containing all the information needed to immediately begin the remediation process. This is part of an automated trigger listing, that allows for a customer to delist directly on the Spamhaus website, after they’ve completed remediation. Remediation steps: Customers will go to the Spamhaus IP lookup website, at https://check.spamhaus.org, where they can check on the status of their IP and continue to monitor it in real time, until it is no longer listed there. Follow the remediation and delisting instructions provided, and check for specific details in the blocklist notification email. DBL (Domain blocklisting) Customers will receive an email notification alerting of the company domain being listed. The email will contain specific information to help narrow down and identify which email source likely triggered it within Marketo. It’s important to note that any email sent from outside of Marketo, that contained the company domain, is suspect. This means, if the sender uses multiple IPs and/multiple email platforms, then any of those could be the source. Remediation steps: Follow the detailed instructions in the email, which will also provide a link to the Spamhaus Domain reputation checker webpage, to check the real time listing status of the affected domain. Once the email source is identified and cause addressed, this customer will follow the online instructions to request to be delisted. Tier II Blocklist SpamCop Impact: SpamCop is not used by any of the major North American ISPs to inform blocking decisions, but it makes it to the Tier II list because it can have a significant impact on B2B email campaigns. SpamCop is considered a Tier I one blocklist for B2B marketers but a Tier II for B2C marketers. SpamCop is a dynamic IP blocklist, that can affect a single IP or a subset of IPs Typically, the block will automatically lift within one business day, but can take longer for relisted IPs. To have triggered a SpamCop listing likely means the sender has a list management problem that should be addressed. How it works: SpamCop lists IPs for one of two reasons: Either the email hit SpamCop spam trap addresses OR A SpamCop user has reported the email unwanted. Most of SpamCop’s spam traps are previously valid addresses that have not been active for 12 months or longer. Remediation steps: If you are seeing a significant number of bouncing emails caused by a SpamCop blocked IP but aren’t sure if your email activity triggered the listing, first identify whether you are sending on a shared sender network or not. If sending from a shared IP range when this occurs, you or any other customer sending from the same network may have contributed to the IP block. This IP block will automatically get dropped within a business day. For those on a Dedicated IP that trigger a listing, refer to the above remediation steps and resources, to address the list management issue. Tier III Blocklist (Low/ No impact ) These are considered the lowest tier and therefore cause the least impact across the Marketo sender ecosystem. Some of these blocklists were more impactful at one time, while others are only impactful based on the sender region (Manitu). Others still can suddenly flare up (Lashback). There are also many blocklists that are ignored (0spam), and are not taken seriously because they do not provide any means to delist once on the list (NoSolicitado) or that they charge money to have the listing removed ( UCEPROTECT ). The pay-to-delist model is not well respected in the email industry. When using blocklist tool checkers, such as MXToolBox, many blocklists will appear, but very few are relevant. Here is our selection of Blocklists you may come across that are least impactful: Project Honey Pot SpamAssassin URIBL/SURBL DrMX PSBL 0spam HostKarma Ascams ZapBL Barracuda Trendmicro Inc. Cloudmark Proofpoint Invaluement ISP Blocklists Some ISPs use internal blocklists to make blocking decisions. Examples include AOL, Yahoo, Gmail, Outlook and Hotmail. If your IP is being blocked by one of these networks, and those networks have a large presence in your lists, a block of this kind could have a noticeable negative impact on delivery. Marketo monitors for significant ISP blocks. Those experiencing deliverability issues with emails not making it to the Inbox and bulking in the spam folder may benefit from additional services with our Email Delivery Consultants. Remediation Steps: Email Delivery Compliance Team works to resolve any ISP blocks. ISP blocks are are usually resolved or lifted within less than 24 hours of a delisting request. Customers experiencing significant blocks for Microsoft domains (outlook.com, live.com, microsoft.com), can submit a request to the delivery team to seek mitigation on their behalf. Additional Resources: Blocklist Deep Dive Abuse Report Deep Dive What is a spamtrap, or spam trap, and why does it matter? Blocklist remediation Blocklist resolution flowchart Successful lead reconfirmation What is a blocklist?

Issue You see that a lead has an unusually high amount of Clicked Link activity for a particular email after delivery. Solution There can be a couple reasons for this. If you see that all links in the email are being clicked immediately upon delivery, it is likely that the lead's email security software is link-testing to guard against phishing or malicious links. However, if you see an unusually large number of link clicks over the course of a day or two, it may be that the lead forwarded the email to other people who clicked on the links. Since the tracking links are specific to the lead who was sent the original email, if the email is forwarded to other people, their clicks will be recorded under the initial lead's activity history. Marketo does not have a way to confirm this is the case, but if you open the Click Link activities in the leads Activity Log and look at the details, you may see the User Agent (which indicates the operating system and client software used to display the email) is different for each click. If you see a variety of different user agents in the details, it is likely the email is being opened and clicked by different people who were forwarded the email.

Double opt-in is the gold standard of email permission. Also known as confirmed opt-in or COI, this practice is where a person fills out an opt-in form and is then sent an email and must click a confirmation message before they are added to the mailing list. Here are some great reasons to use double opt-in: Protects against typos and bots Protects against spamtraps Reduces bounce rates, improves deliverability Required in some regions Increases engagement rates If you'd like to set up double opt-in with Marketo you can do this with the use of the Marketing Suspended function. Marketing Suspended is a status that is functionally equivalent to Unsubscribe - Marketo will not send these leads marketing emails, but will send them operational emails. You'll need an opt-in form and a pair of trigger campaigns. First, set up a trigger campaign such that, when the form is filled out, the flow has a Change Data Value to mark the lead as Marketing Suspended, and then a Send Email step to send an operational email that you will use to confirm their request to join your mailing list. Your confirmation email should be short and to the point, and make sure to set it as an operational email. We recommend that it is clearly branded, use a simple subject line such as "Confirm Your Request to Join Our Mailing List" or similar, and include a link within to a simple confirmation landing page. Set a second trigger campaign such that whenever someone clicks the confirmation link to the confirmation landing page, the flow will change data value Marketing Suspended new value is false. A follow up flow should be set up that if the recipient doesn't activate the link in the confirmation email the address is either deleted or set to Blacklist within the database after a reasonable timeframe, usually 2 weeks. The Blacklist status will ensure that no email is set to that lead until they have completed the subscription process. This prevents future operational emails from being sent to this email address unintentionally. That's it! Now, when someone fills out your opt-in form, they will be set to Marketing Suspended until they click the confirmation link in your operational confirmation email. You'll be well on your way to increasing the quality of leads on your mailing list by implementing this simple process.

Issue You receive a DMARC report from an ISP saying that your email failed to pass the SPF alignment check, but when you check your SPF listing in Admin > Email > SPF/DKIM, SPF is verified. Solution The SPF record in Admin > Email > SPF/DKIM is tied to your FROM domain. DMARC alignment (using SPF) aligns the domain in the FROM address with the domain in the “return-path” address. This “return-path” address, usually using a '*.mktomail.com' domain, is generally unseen by recipients and directs email bounces and errors back to Marketo for processing. Failed DMARC alignment, between these two domains, is what is triggering the failure your DMARC reporting. DMARC compliance requires EITHER DKIM or SPF compliance, not both in most cases. This article reviews the two methods available for DMARC alignment - https://nation.marketo.com/docs/DOC-1202-technical-tip-set-up-dmarc-verified-domains-in-a-few-easy-steps Having DKIM DMARC alignment may be enough and you may not need to rely on full SPF DMARC alignment. In order to set up SPF DMARC alignment, Branded Return-Path will allow you to align the “return-path” domain with your sending FROM address domain. If you have a dedicated IP on the current pricing plan or are on the Trusted IP range, Marketo can brand your return path at no additional charge. If you have a legacy Silver Dedicated IP package, or are on the Shared IP range, you can purchase the Branded Return Path as an add-on. More technical info can be found here: What is DMARC? - https://nation.marketo.com/docs/DOC-1097 https://nation.marketo.com/docs/DOC-5910-branded-envelopefrom-on-shared-or-trusted-ips https://nation.marketo.com/docs/DOC-5951-branded-envelopefrom-on-dedicated-ips

Issue You want to recall emails sent from your Marketo instance. Solution Once an email has been sent from Marketo Servers it cannot be recalled or pulled back. You can cancel a program before it sends at its scheduled time using the steps here: https://docs.marketo.com/display/public/DOCS/Abort+Email+Program The above cancellation only works on Email Programs. If you are wanting to cancel a smart campaign follow these instructions: https://docs.marketo.com/display/public/DOCS/Abort+a+Smart+Campaign Note: A smart campaign will only stop what hasn't been run yet. If you already had 100 emails sent by the time you cancel it, those 100 emails cannot be unsent. You may see in your Outlook an option for "Recall Email." This function within Outlook only works with internal sends/private systems where the client can request the server revoke access to other client mailboxes before they're viewed, such as your office email to other users in the same company.

Issue You want to set up a DKIM key on one of your domains or subdomains, but another service has a DKIM key already set up on the selector/domain combo. Solution Beginning October 2023, Marketo has upgraded it's DKIM feature to allow for a Custom Selector for DKIM Keys. Most Users will be able to utilize the prior default selector, m1, as their DKIM Key. However, if another integration is already utilizing the m1 selector, a custom value can be used. Common ones seen are "m2", "a1", "mkto", etc. It can be longer, but shorter is generally better Afterwards, you'll be able to validate DKIM as detailed in documentation: https://docs.marketo.com/display/public/DOCS/Set+up+a+Custom+DKIM+Signature

Note: Once you have migrated to Admin Console, you can manage your support cases through the feature provided in the Admin Console Platform. To learn more, visit: https://experienceleague.adobe.com/docs/customer-one/using/home.html. Once you have submitted a case to Marketo support, we provide a simple way of staying connected to your case and the cases submitted from your company through the Marketo Support Portal. You can access the support portal through your Marketo instance by selecting Community in the top right corner: This is a article attached image You can also access the support portal directly at https://support.marketo.com and login with your Marketo credentials (login and password). This will not work for users with SSO. Once you are in the support portal you can Create a Case for Marketo Support or you can also review any cases that are open and being worked on by support or review your case history. Navigate to My Case management: This is a article attached image From the My Cases navigation you can access the following case views: This is a article attached image My Recent Cases* - Cases that you have opened in the past 30 days All Company Recent Cases* - Cases that any authorized support contact has opened in the past 30 days My Open Cases – Cases created by you that are being triaged by Support and pending Support’s response and are more than 30 days old My Closed Cases – Cases that were created by you and are now closed My Awaiting Fix Cases – Cases that were created by you where Marketo is developing a fix which will be implemented at a later date All Company Closed Cases – Cases that were created by you or your colleagues that are now closed All Company Open Cases - All open cases submitted for the account Company Awaiting Fix Cases – Cases that were created by you or your colleagues where Marketo is developing a fix which will be implemented at a later date Management Escalations - Escalations opened by you or your colleagues Survey Cases - Surveys that are available for you to fill out after a case is closed *Cases that have been opened for more than 30 days will move from Recent cases to Open cases To view specific case details, click a case number. This is a article attached image From the Case Details, you can perform the following: Close your Case - Select the "My Case is Resolved" button to close your case Add Comments - Provide additional comments to support or respond to a Support question Add Attachment - Provide any screenshots or documents that will help illustrate the issue you are reporting If your case has been closed there are two options available to you. Reopen - You can reopen your case if you are not satisfied with the case resolution by adding a comment in the case. Case Survey - Once your case has closed, please consider offering feedback on the level of Support you received.

Issue What BCC options are there for email sends? Solution Marketo support can enable BCC on request. If an email address is to be BCC'd on a batch email send, they'll get 1 BCC for every 1 email Marketo sends. (10k email sends = 10k BCC emails). This can be useful for archiving and compliance purposes, but should not be used for simple campaign confirmation. If you just want to make sure the email went out as scheduled, the easiest way is to create yourself as record in the database, and include yourself in the batch send. Only one BCC address is supported at this time, if multiple BCC recipients are required then it is recommended to create an alias which will forward the messages. This setting is applied to the entire instance, and will affect all emails sends from all Campaigns and Programs while enabled. Every email sent while this feature is enabled will result in a corresponding BCC email. CAUTION: Dedicated email address setup for the BCC email traffic must be able to handle high volumes of email. Discuss with your IT Team or email service provider to verify their Email Server can handle the estimated volume of incoming email. If the Email Server is not well equipped this feature can cause your Email Server to backlog, become unavailable temporarily, or reject the BCC emails. If the request is for a single email send, we recommend using the following CC process: Email CC | Adobe Marketo Engage

Marketo Support's Mission is: To provide fast and friendly world-class support through creative, flexible solutions to empower Marketo Automation Software success. Areas of Responsibility: Technical Support Engineers (TSEs) are your initial point of contact for any technical questions or concerns. TSEs are responsible for troubleshooting issues within your Marketo instance and common include: My Marketo Marketing Activities Design Studio Lead Database Analytics Revenue Explorer (RCA/RCE) Calendar Deliverability Tools Search Engine Optimization (SEO) Web Personalization (RTP) Admin Community Our TSEs are not web developers and as a result they are unable to troubleshoot most types of custom coding (ie. HTML, JavaScript, XML, etc.). Our support team is able to help with the following types of non-custom code: Simple Munchkin Code Asynchronous Munchkin Code Asynchronous jQuery Munchkin Code SOAP API REST API Our TSEs are here to assist you and our support commitment to our customers is to always work towards providing an above and beyond support experience. Note: Our team is not against looking at custom code and, based on the subject matter expertise, our TSEs might be able to offer suggestions and recommendations, but we do want to make it clear that they are not responsible for fixing or updating any custom code that has been implemented. Response Time Our TSEs are bound to responding to your cases and issues within the Service Level Agreements from your account's level of support services. We track response milestones to ensure that your cases are being handled in a timely manner as dictated by our agreed to Service Level Targets.

The Google Apps antispam system uses a unique means of allowlisting. Customers on shared IPs should allowlist Marketo's entire sending ranges, because we sometimes need to move customers between IPs for technical reasons. The way to allowlist a range in Google Apps is to configure a manual IP block with a pass through. G Suite enables you to specify an IP address or range of addresses within a domain, and allow messages from those addresses only. This feature is sometimes referred to as IP lock. In G Suite, you set up this feature in the Content compliance setting. IP lock is a method that readily enables an administrator to simultaneously whitelist all incoming traffic from a particular domain while equally preventing spoofing by manually defining the allowed IP ranges. The following instructions are particularly useful with domains that do not have an SPF record and/or use third party applications to legitimately spoof their address. Setting up IP lock with the Content compliance setting includes three separate procedures: Adding the domain, defining the allowed IP range, and setting the correct disposition and NDR. See this page of Google documentation for more information: Enforce 'IP lock' in G Suite - G Suite Administrator Help Instead of using a CIDR range, this interface asks for the first and last IPs in the given range. Here are ours: 199.15.212.0 - 199.15.212.255 199.15.213.0 - 199.15.213.255 199.15.214.0 - 199.15.214.255 199.15.215.0 - 199.15.215.255 192.28.146.0 - 192.28.146.255 192.28.147.0 - 192.28.147.255 94.236.119.0 - 94.236.119.63 185.28.196.0 - 185.28.196.255 103.237.104.0 - 103.237.104.255 103.237.105.0 - 103.237.105.255 130.248.172.0 - 130.248.172.255 130.248.173.0 - 130.248.173.255 Is this article helpful ? YesNo

Issue Emails cannot be delivered from the Marketo instance and the following Soft Bounce code was recorded in the record's activity log. 554 5.4.7 [internal] (last transfail: 435 5.7.8 Authentication credentials invalid) Environment Dedicated IP Address SMTP Relay credential invalid Soft Bounce Code: 554 5.4.7 [internal] (last transfail: 435 5.7.8 Authentication credentials invalid) Cannot send email Email Delivered not recorded in activity log Solution Provide Marketo Support with the updated credentials so Support can create an internal request to get the update the credentials on Marketo's end. The process can take up to three (3) business days to complete. Note: Avoid using special characters in the password such as quotation mark (") as it can alter the configuration. Root Cause The credentials for the SMTP Relay has been changed and no longer match what is stored in Marketo. In most cases it is the password as it need to be change on an annual basis.

What is a Blocklist? Can I Still Send My Emails, or Are You Blocking Me from Sending? What Is a Spamtrap and Why Do They Matter? Can You Give Me the Spam Trap Address That Triggered the Blocklist So I Can Remove It from My Database? Can You Give Me More Information regarding the Blocklist Issue? What Is the Quarantined IP Range? I Sent This Email Campaign a While Ago. Why Am I Only Getting Notification of the Blocklist Issue Now, and Am I Still Blocklisted? The Blocklist Notification Went to the Wrong Email Address. Why Was It Sent to That Address? Which blocklists should I be concerned about? - Top Blocklists – What You Need to Know How do blocklist issues get resolved? What steps do I need to take to resolve the blacklist issue? - Blocklist Remediation

Summary You have set up a campaign or campaigns in the Email Deliverability Tool (250ok), but there is no engagement metric showing Total opens and Unique opens, which should be available in the ‘Engagement Overview’ in the Email Deliverability tool. You would need to ensure that you have configured the necessary setup for the tracking to work in the Email Deliverability tool. Issue Campaigns created in the Email Deliverability tool (250ok) doesn’t show any engagement overview metric such as total opens and unique opens. Environment Email Deliverability tool (Production/Sandbox) Solution You would need to implement the necessary setup for the metric to show in the Engagement Overview in the Email Deliverability tool (250ok) Follow the steps below to ensure you have configured the setup for campaign tracking. 1. Ensure your DNS CNAME is configured. (All that is required is creating a CNAME DNS entry on this domain that points to 250analytics.com) For more information, you can refer to this external documentation: https://www.validity.com/knowledge-base/what-are-custom-domains-in-250ok-analytics/ 2. Insert the correct tracking pixel code retrieved from the Email Deliverability tool. 3. Always utilizing the ‘c=‘ tag in your tracking code for your campaigns to ensure the tracking is measured correctly in the Email Deliverability tool. (Obviously, the CNAME above is essential to have it set up correctly). You can follow a guide on how to implement the ‘c=‘ tag and retrieve the tracking pixel is here: https://help.returnpath.com/hc/en-us/articles/360046308092-How-Do-I-Add-My-250ok-Tracking-Pixel- Once you have all these configuration settings, you can start tracking your campaigns which are sent via Marketo in the Email Deliverability > Engagement Overview. Root Cause Mis-configuration or no configuration made causing the campaign tracking does not work.

When a customer triggers a blacklisting on Marketo's shared IP range that customer is moved to a set of IPs we call the quarantined IP range. We do this to protect the health of our shared network and ensure the best deliverability possible for all of our customers on that network. If you have received a Blocklist Notification from Marketo reporting that you have triggered a blocklisting your Marketo account is now in the quarantined IP range. While you are in the quarantined range it is possible that you may experience a slight decrease in your deliverability rates. The reason for this is that you are now sending from a range made up of senders that have also caused other blocklist issues. All customers have received a notice of the listing and are in the process of repairing their database. There are two ways to be removed from the quarantined IP range: Follow the steps outlined in our Blocklist Remediation article. Be sure to fill out the form referenced in the email alert to indicate that you have taken steps to mitigate the issue. Demonstrate clean sending behavior for 3 months. We remove senders from the quarantined IP range if they have not triggered any new listings in 3 months. To ensure your best deliverability rates blocklist issues should be addressed right away to prevent further damage to your sending reputation. Furthermore, if no action is taken to improve list hygiene the issue will likely recur. Marketo's Privacy Team strongly recommend following the Blocklist Remediation steps. Additional Resources: Blocklist Deep Dive

Issue General recommendations for managing and improving deliverability to China. Solution If you are looking for general recommendations around delivering to China, here are some resources both from our Community and external sources. Navigating email delivery into China Golden Shield Project overview Sampi China Email Marketing and Chinese Anti-Spam Laws Summary English language version of the Measures for Administration of Email Service on Internet Lehman, Lee & Xu English language version of the Measures for the Administration of Internet E-mail Services 2006

The Charter of Fundamental Rights of the European Union recognizes in Article 8 the right to the protection of personal data. This fundamental right is developed by the European legal framework on the protection of personal data consisting mainly of the Data Protection Directive and the ePrivacy Directive. They lay down several substantive provisions imposing obligations on the data controller and recognizing rights to the data subject, prescribing sanctions and appropriate remedies in cases of breach, and establishing enforcement mechanisms to make them effective. Although strictly speaking it is data controllers who bear legal responsibility for complying with data protection rules, also those who design technical specifications and those who actually build or implement applications or operating systems bear some responsibility for the data protection aspects from a societal and ethical point of view. The law applies to all Member States of the European Union. However, even websites outside the EU are required to comply with the law if they are targeting Member States. For example, a site based in the USA that sells products to consumers in the UK, or that has a French-language version of its site aimed at users in France, will still have to comply. Anonymous cookies, those that do not contain information that would enable you to identify a user, do not infringe the law anonymity and therefore are not a problem. The directive’s core requirement is to define how consumer’s "opt-in" or "opt-out" to cookies, and what level of information the consumer must be provided when cookies are used so they are sufficiently informed. Support Browser Do Not Track Settings https://docs.marketo.com/pages/viewpage.action?pageId=2951124 Visits to web pages do not reflect actual activity https://nation.marketo.com/docs/DOC-1300

Setting an email to "operational" does the following No unsubscribe link automatically added Email will be sent to leads set to Unsubscribed Email will be sent to leads set to Marketing Suspended Note - when sending an operational message, Unsubscribed and Marketing Suspended leads will still be included in the "blocked from email" count on the schedule tab of the campaign. When is it OK to use the operational setting? Sending marketing email to unsubscribed addresses is illegal. For this reason, you should be extremely careful to only use this setting in extremely limited circumstances. Using this setting incorrectly violates Marketo's Terms of Service, and most antispam laws. There may be legal consequences for using this setting incorrectly. Good uses of the operational setting fall into two categories: Transactional messages Relationship messages What's a transactional message? A transactional message is part of a transaction that a lead has initiated and you are responding to. Here's some examples of transactional messages: Receipts for purchases Registration confirmations Download links in response to form fill-outs Requested assets (whitepapers, spec sheets, etc.) What's a relationship message? A relationship message describes something that affects your business relationship with the lead. Here's some examples of relationship messages: Downtime notifications Changes to terms of service Recall notices End of service notifications Operational messages should not contain any marketing content at all. In other words, do not use the operational setting to send a message that contains a receipt and a promotion, only a receipt.

Marketo Champions are customers who have demonstrated outstanding leadership in the Marketo Community, are experts in Marketo products, are avid contributors in the social world, and are loyal advocates of the Marketo brand. Benefits and perks our Champions receive include: Access: Meetings with our product and marketing teams to give exclusive feedback Previews: Given early previews to products, features, and releases when available Publicity: Exclusive speaking opportunities at our annual Marketo Summit and other events Networking: Special networking events with Marketo executives and fellow Champions and semi-annual conference calls Ownership: Ownership of content and exclusive activities at our annual Marketo Summit that showcase your expertise and thought leadership Credibility: Special Champion badge on Marketo Community profiles, and profiled on Marketo's corporate website Sweet Swag: Champion-exclusive swag To find out more information and apply, click here. To view a complete list of current Champions, click here. Join the Marketo Elite Today!

Issue If your IT department or a client asks for your Marketo dedicated sending IP address in order to whitelist your marketing emails, here is how you can find it. Solution Your Marketo instance's dedicated IP address can be found by sending yourself a live version of one of your Marketo emails, then checking the message headers for the IP address that it was sent from. It should also be included in the original documentation that Marketo's deliverability team would have provided you when the dedicated IP was set up. If you are unable to locate the IP address in the emails, or are unable to find your original documentation, please reach out to Marketo Support and we can look it up for you. Who This Solution Applies To Customers with a dedicated sending IP

Knowledgebase

Maintaining a Directory of Leads Bouncing Emails

Top Blocklists - What You Need to Know

Lead Record Shows an Unusually Large Number of Link Clicks for an Email

How to Set Up Double Opt-In (COI)

DMARC Report Says an Email Fails SPF but the SPF Record Shows as Verified.

Can an Email Be Recalled?

Custom DKIM Selector

Managing your Support Cases

BCC Options For Emails Sent By Marketo

Marketo Support Policies

Allowlisting with Google Apps

Soft Bounce Details: 435 5.7.8 Authentication credentials invalid.

Blocklists: Frequently Asked Questions

Email Deliverability Tool - Campaigns Not Being Tracked

Blocklists: Frequently Asked Questions

What is the quarantined IP range?

Deliverability to China - Resources

Customer User Guide - Marketo Customer Support Links

Marketing Automation and the European Privacy Laws

Operational Emails - Important Information

Marketo Champion Program

Where Can I Find My Dedicated IP Address?