Knowledgebase

Featured article

Included in this article Overview Data you’ll get from Email Bounces Bounce Categories Hard Bounces Soft Bounces Bounce Details Building the Directory 1. Create 6 custom fields 2. Create a Program to house everything 3. Create a Static List 4. Create two Smart Campaigns Smart Campaign One - Logging Email Bounces with Bounce Details Smart Campaign Two - Remove Leads From the List After Successful Deliveries 5. Create Custom List View Showing Bounce Details Overview Bounce activities carry details for why the email was bounced, but it’s housed within the activity log entry, not in a field on the lead record, so it’s difficult to export that data. This article will show you how to extract that information to create a directory of leads bouncing emails and how to make the list automatically update. This will also create counters for bounces and successful re-deliveries after bounces happen. Data you’ll get from Email Bounces Bounce Categories Email bounces come in different types depending on why the email was bounced; Hard Bounces or Soft Bounces. Hard Bounces Hard Bounces come in two types, Category 1 and Category 2. Category 1 bounces are emails that have been marked as spam by the recipient mail server. Many email servers monitor blacklists or spam traps, so after de-listing with them, leads that have had a Category 1 bounce previously may be able to receive emails again. Category 2 bounces occur due to an email address that is invalid or doesn’t exist. Soft Bounces Soft Bounces come in three different types, Categories 3, 4 or 9. Category 3 bounces are usually temporary, caused by full mailboxes, timeouts, or throttling. Any email with this designation has been retried for up to 24 hours (36 for AOL). Category 4 bounces are caused by technical problems, Transient Failures, Admin Failures, DNS Failures. Any email with this designation has been retried for up to 24 hours (36 for AOL). Category 9 bounces are unknown, undetermined or gibberish details. Any email with this designation has been retried for up to 24 hours (36 for AOL). Bounce Details When an email is bounced, the recipient mail server includes details of why it was bounced. These are created by the admin of the recipient mail server and vary greatly, but most will give some explanation that can give valuable information. Email Bounce Codes Building the Directory 1. Create 6 custom fields You’ll need 6 custom fields, two DateTime fields, two Score fields, and two String fields Name the DateTime fields “Bounce Date” and “Email Delivered After Bounce”. Name the Score fields “Email Bounces” and “Deliveries After Bounces” Name the String fields “Email Bounce Details” and “Email Bounce Category” Directions for creating Custom Fields can be found here: Create a Custom Field in Marketo 2. Create a Program to house everything Use a default program type and name it "Directory of Leads Bouncing Emails". Info on creating programs can be found here: Create a Program 3. Create a Static List This static list will be your actual directory that contains all of the leads that are currently bouncing emails. Name it "Active Bounce List". Info on creating a static list can be found here: Create a Static List 4. Create two Smart Campaigns These two Smart Campaigns are what will be used to add and remove leads from your active bounce list. Info on creating Smart Campaigns can be found here: Create a New Smart Campaign Smart Campaign One - Logging Email Bounces with Bounce Details Your first Smart Campaign will be used to listen for any email bounces that occur. The campaign will populate the “Bounce Date”, “Email Bounce Category” and “Email Bounce Details” fields. It will then add one point to the “Email Bounces” score field which can be used to count how many bounces have occurred per lead. Lastly, the campaign will add the lead to the static list which will be an active directory of leads who are bouncing emails. Campaign Smart List Use the two triggers of “Email Bounces” and “Email Bounces Soft” in the Smart List. Set both triggers to “is any” so that they will fire whenever any email bounces for any reason. Campaign Flow The Flow of the campaign will have 5 flow steps. The flow will use a System Token and some Trigger Tokens, which can be used to pull details out of the action that activated the trigger. In this case, the Trigger Tokens will be pulling out the details on why the emails were bounced. That info is in the bounce message and is logged in the lead's activity log. Normally you'd have to comb through the activity log one at a time to find these details for each individual lead. This method, however, will pull the details out automatically for all leads. Flow Step 1: Change Data Value Attribute: “Bounce Date” New Value: {{system.dateTime}} Flow Step 2: Change Data Value. Attribute: “Email Bounce Category” New Value: {{trigger.category}} Flow Step 3: Change Data Value Attribute: “Email Bounce Details” New Value: {{trigger.details}} Flow Step 4: Change Score Score Name: “Email Bounces” Change: +1 Flow Step 5: Add to List List Name: “Active Bounce List” Smart Campaign Two - Remove Leads From the List After Successful Deliveries Campaign Smart List The Smart List of the campaign will need a trigger for “Email is Delivered” set to “is any” and also a filter of “Member of List” looking just for leads that belong to your Static List. This way, the campaign will only apply to leads who have had an email bounce but have then had an email successfully delivered afterwards. Campaign Flow The Flow of the campaign will have 3 flow steps to do the following; log when the email was delivered, add a point to the "Deliveries After Bounce" Score Field, and remove the lead from the "Active Bounce List". Flow Step 1: Change Data Value Attribute: “Email Delivered After Bounce” New Value: {{system.dateTime}} Flow Step 2: Change Score Score Name: “Deliveries After Bounces” Change: +1 Flow Step 3: Remove from List List Name: Operational.Active Bounce List 5. Create Custom List View Showing Bounce Details The custom fields you’ve created for email bounce information won’t show automatically in the view of your list. You can create a new view of the list to show just this information so that when it is exported it will give you only the email bounce information you need. Once the list has the necessary details, it can be exported with those columns included so that you can work with it. You can identify emerging trends and issues with your deliverability by looking for common themes among the bounce details. Directions for creating Custom Views can be found here

Featured article

(Article Updated - August 2024) Overview A blocklist is a database of IP addresses or domains that have been associated with the sending of unsolicited commercial email or spam. Internet Service Providers (ISPs) and business email networks use information from blocklists to filter out unwanted email. As a result there can be a drop to inbox delivery rates if the IPs or domains involved with sending email are listed on a blocklist. Marketo’s Email Delivery and Compliance team monitors blocklist activity on our IPs and domains daily. When an impactful listing occurs, we reach out to the blocklist, attempt to identify the sender that triggered it, and work with the blocklist organization to get the listing resolved. There are thousands of blocklists, most will not have a significant impact on your delivery rates. Below, we have compiled a list of the blocklists that commonly appear across our sender ecosystem. Each blocklist has been grouped into a top tier (Tier I) by most impactful, to the bottom least impactful tier (Tier III). These may have little to no impact across our sender network. Tier I Blocklist Spamhaus (SBL) Impact: Spamhaus is the only blocklist that we categorize as a Tier I for a reason: it has by far the greatest impact on delivery. It is the most well-respected and widely used blocklist in the world. A listing at Spamhaus will have a negative effect on your ability to deliver emails to your customer’s inbox and can cause bounce rates of over 50%. Evidence suggests that most of the top North American ISPs use Spamhaus to inform blocking decisions. How it works: Unlike many blocklists, Spamhaus lists senders manually. This means they are proactively watching sender activity, collecting data, and base listings on a number of variables. Most commonly senders are listed for mailing to spam trap addresses that Spamhaus owns. Sometimes Spamhaus will list senders based on recipient feedback as well. Next Steps: Please note that every Spamhaus email can be quite different depending on the information provided and the nature of the listing . Because Spamhaus has multiple types of listings, the remediation steps are based on which type of blocklisting has occurred. We have listed the most common types to affect Marketo customers, from most to least impactful. Impact can range from a full block of top severity, to a partial block that is less severe (CSS Data, DBL). If remediation isn’t performed and the problem not addressed, these listings can increase in severity and turn into a full blocklisting. Spamhaus Blocklistings Types SBL (full blocklisting) Considered the most impactful. Remediation steps: Our team monitors closely for Spamhaus listings. Once alerted to the listing, we send an email notifying the customer, and reach out to the Spamhaus contact to start the remediation process. Only a Marketo delivery team member should be in direct correspondence with the Spamhaus contact, to speak on behalf of the customer, and to relay their questions and instructions, ensuring quick resolution and reduced impact. Senders that trigger this listing on a shared IP range will be moved to a more isolated, penalty range (IPB), so as not to impact the other shared senders. Those affected on a Dedicated IP, only impact their own sending and will not be moved. However, depending on the severity of the issue, our team may need to revoke a customer’s ability to send any emails until full resolution. The listing will last until Spamhaus is satisfied that the offending sender has taken the appropriate steps to mitigate the problem. SBL CSS Customers are alerted of the listing with an email containing all the information needed to immediately begin the remediation process. This is part of an automated trigger listing, that allows for a customer to delist directly on the Spamhaus website, after they’ve completed remediation. Remediation steps: Customers will go to the Spamhaus IP lookup website, at https://check.spamhaus.org, where they can check on the status of their IP and continue to monitor it in real time, until it is no longer listed there. Follow the remediation and delisting instructions provided, and check for specific details in the blocklist notification email. DBL (Domain blocklisting) Customers will receive an email notification alerting of the company domain being listed. The email will contain specific information to help narrow down and identify which email source likely triggered it within Marketo. It’s important to note that any email sent from outside of Marketo, that contained the company domain, is suspect. This means, if the sender uses multiple IPs and/multiple email platforms, then any of those could be the source. Remediation steps: Follow the detailed instructions in the email, which will also provide a link to the Spamhaus Domain reputation checker webpage, to check the real time listing status of the affected domain. Once the email source is identified and cause addressed, this customer will follow the online instructions to request to be delisted. Tier II Blocklist SpamCop Impact: SpamCop is not used by any of the major North American ISPs to inform blocking decisions, but it makes it to the Tier II list because it can have a significant impact on B2B email campaigns. SpamCop is considered a Tier I one blocklist for B2B marketers but a Tier II for B2C marketers. SpamCop is a dynamic IP blocklist, that can affect a single IP or a subset of IPs Typically, the block will automatically lift within one business day, but can take longer for relisted IPs. To have triggered a SpamCop listing likely means the sender has a list management problem that should be addressed. How it works: SpamCop lists IPs for one of two reasons: Either the email hit SpamCop spam trap addresses OR A SpamCop user has reported the email unwanted. Most of SpamCop’s spam traps are previously valid addresses that have not been active for 12 months or longer. Remediation steps: If you are seeing a significant number of bouncing emails caused by a SpamCop blocked IP but aren’t sure if your email activity triggered the listing, first identify whether you are sending on a shared sender network or not. If sending from a shared IP range when this occurs, you or any other customer sending from the same network may have contributed to the IP block. This IP block will automatically get dropped within a business day. For those on a Dedicated IP that trigger a listing, refer to the above remediation steps and resources, to address the list management issue. Tier III Blocklist (Low/ No impact ) These are considered the lowest tier and therefore cause the least impact across the Marketo sender ecosystem. Some of these blocklists were more impactful at one time, while others are only impactful based on the sender region (Manitu). Others still can suddenly flare up (Lashback). There are also many blocklists that are ignored (0spam), and are not taken seriously because they do not provide any means to delist once on the list (NoSolicitado) or that they charge money to have the listing removed ( UCEPROTECT ). The pay-to-delist model is not well respected in the email industry. When using blocklist tool checkers, such as MXToolBox, many blocklists will appear, but very few are relevant. Here is our selection of Blocklists you may come across that are least impactful: Project Honey Pot SpamAssassin URIBL/SURBL DrMX PSBL 0spam HostKarma Ascams ZapBL Barracuda Trendmicro Inc. Cloudmark Proofpoint Invaluement ISP Blocklists Some ISPs use internal blocklists to make blocking decisions. Examples include AOL, Yahoo, Gmail, Outlook and Hotmail. If your IP is being blocked by one of these networks, and those networks have a large presence in your lists, a block of this kind could have a noticeable negative impact on delivery. Marketo monitors for significant ISP blocks. Those experiencing deliverability issues with emails not making it to the Inbox and bulking in the spam folder may benefit from additional services with our Email Delivery Consultants. Remediation Steps: Email Delivery Compliance Team works to resolve any ISP blocks. ISP blocks are are usually resolved or lifted within less than 24 hours of a delisting request. Customers experiencing significant blocks for Microsoft domains (outlook.com, live.com, microsoft.com), can submit a request to the delivery team to seek mitigation on their behalf. Additional Resources: Blocklist Deep Dive Abuse Report Deep Dive What is a spamtrap, or spam trap, and why does it matter? Blocklist remediation Blocklist resolution flowchart Successful lead reconfirmation What is a blocklist?

Issue Issue Description One (or several) of the emails in your Engagement Program stream with Recipient Time Zone enabled failed to send but there was no failure or error message. You edited the email(s) within 25 hours of the next scheduled cast. Solution Issue Resolution Our Engagement Program documentations states that "We require you to schedule the first cast at least 25 hours in the future because there may be people who qualify for the cast in every time zone across the globe." (https://docs.marketo.com/display/public/DOCS/Schedule+Engagement+Programs+with+Recipient+Time+Zone) This also applies to making edits to emails. If you edit an email in an Engagement Program stream with Recipient Time Zone enabled within 25 hours of the next scheduled cast. The pre-processing is disrupted and the email will fail to send. To avoid the issue please either 1) disable Recipient Time Zone 2) refrain from making edits to the Engagement Program streams or assets 25 hours before the next scheduled cast. Who This Solution Applies To Customers using Engagement Program with Recipient Time Zone enabled

Issue Best practices for trigger campaigns. Environment This applies to all Marketo users who are utilizing trigger campaigns in their marketing activities. Solution Marketo's trigger campaigns are designed to monitor every relevant activity, even if it doesn't immediately meet certain constraints or filters. For example, if there are 10 active Clicked Email Campaigns and 100 leads engage with an email, each lead will be evaluated 10 times to check if they qualify for a trigger. In this example that would lead to 1000 evaluations total. This happens even if they don't meet the criteria due to certain filters or constraints. To make your trigger evaluation process quicker and more efficient, follow these best practices: 1. Deactivate any trigger campaigns that are no longer needed. This reduces the number of active monitors that could potentially activate trigger event evaluations. Note: Marketo automatically deactivates smart campaigns that have been dormant (no lead triggers them) for 6 months or more on a quarterly basis. However, you can manually deactivate campaigns whenever necessary. 2. Convert Trigger campaigns to Batch campaigns if immediate responses are not required. This is particularly useful for activities or campaigns that can run overnight. Batch campaigns operate on a separate component of Marketo's processors, meaning they won't impact the speed of Trigger qualifier processes.

Issue How "And/Or" logic is applied to constraints in Smart List filters and triggers. Solution In Smart List filters, additional constraints act as "and" logic. Example: Was Sent: [this email asset] between this date range min number of times: 2 will function as Was Sent: [this email asset] -and- between this date range -and- min number of times: 2 When you have multiple values inside a single constraint, that is "or" logic. Was Sent: [this email asset OR that email asset] There is not a way to change the logic of constraints, so if you wish to have some sort of 'Or' between constraints then you would have to use multiple filters with 'OR logic between them.

Issue Description How to view email opens and their time of activity per recipient? Issue Resolution Generally, the date/time stamps on email opens by recipient can be retrieved via the results tab of a smart campaign. If the emails were sent via an email program, go into the Control Panel and click the View Results link in the Audience pane. The other ways to get the activities and time by recepient is to: 1.) Create a smart list to find all leads that have opened the specified email and inspect each activity log https://docs.marketo.com/display/public/DOCS/Locate+the+Activity+Log+for+a+Person https://docs.marketo.com/display/public/DOCS/Filter+Activity+Types+in+the+Activity+Log+of+a+Person OR 2.) Use the activities REST API http://developers.marketo.com/rest-api/lead-database/activities/ http://developers.marketo.com/blog/get-activity-data-via-the-rest-api/ http://developers.marketo.com/blog/retrieve-activities-for-a-single-lead-using-rest-api/ http://developers.marketo.com/blog/polling-for-activities-using-rest-api/

This is a article attached image Upon signing a contract with Marketo you are provisioned a Marketo instance and a Support Service. There are four different types of Support Services which are available to meet different customer support needs: Online (Legacy) Business or PREMIER SUPPORT BUSINESS (Legacy) Premier or PREMIER SUPPORT ENTERPRISE (Legacy) Elite or PREMIER SUPPORT ELITE Each Support Service has a different Service Level Target (SLT). An SLT is the amount of time Marketo Support targets to make first contact with you after a support case has been submitted. SLTs differ for each Support Service and priority level. Priority levels range from Priority P1 to Priority P4. Here are the SLTs and priority levels for each Support Service: Priority Online (Legacy) Business PREMIER SUPPORT BUSINESS (Legacy) Premier PREMIER SUPPORT ENTERPRISE (Legacy) Elite PREMIER SUPPORT ELITE P1 1 hour 1 hour 1 hour 30 minutes 30 minutes 30 minutes 15 minutes P2 4 hours 3 hours 2 hours 2 hours 1 hour 2 hours 30 minutes P3 6 hours 5 hours 4 hours 4 hours 2 hours 2 hours 1 hour P4 3 days 1 day 1 day 1 day 1 day 1 day 1 day Here are the descriptions for each priority level: Priority Description P1 Mission Critical: Core business function down or potential loss of mission critical data P2 Urgent: Major feature or workflow is not functioning. Mission critical workflow and majority of user community is not blocked P3 Important: Normal usability or task completion is impacted but functional, or workaround is available P4 Minor: Minor issue requiring a correction. Normal workflow is not impacted Find more information About Support here!

Issue Attempting to use Champion/Challenger tests in nested programs within engagement programs fails to run test. Solution Champion/Challenger email tests must be inserted directly within the email stream as an asset. The testing functionality is based on being triggered which is the process of a stream content cast. When the email is nested in a smart campaign within a program, this campaign executes as a batch campaign and will see inconsistent behavior for Champion/Challenger testing.

Issue When attempting to move a folder with a program into a different workspace, the below exception is thrown: Rule is incomplete, '<Field Name> is...' requires value In the below example, the field name is 'New Status ID': Solution This exception is thrown when a smart list within the Folder contains an incomplete filter. To resolve, you can either: 1. Remove the Smart List filter that is incomplete 2. Set a value for the Smart List filter

Issue After creating an Email Program with an A/B test, you create smart lists (or smart campaigns) and would like to use filters such as "Opened Email" for the A/B test email. When starting to type the A/B test email name into the smart list filter, the A/B test email name does not show as available to select (it may show a red squiggly line). Solution The Email Program (with the A/B test) needs to be in "Approved" status before the A/B test email assets can be entered into a smart list filter.

Summary Flow step choice condition for "Person was Deleted from SFDC" with 'in past' "7 days" causes campaign failure Issue This flow step choice type causes a campaign failure because it is not supported. This is expected behavior. Solution Customers have to use Member of Smart List as indirection for the desired filter condition. i.e. Create a new Smart List with the "Deleted from SFDC" filter. Then change this failing flow step choice to use 'Member of Smart List' with the Smart List just created. Example flow step:

Issue My token is not displayed correctly in view as webpage version of email. Environment If customers manually type a {{my.token}} and use uppercase M such as {{My.token}}, then the view as webpage version of email may not render that token as expected. The feature to HTML encode lead tokens (source of external data) for security reasons, applies to my tokens that incorrectly use uppercase M. HTML Encode Tokens Solution Use the token picker to pick the correct lowercase {{my.token}}.

Issue Program member custom fields are not syncing data to Salesforce campaign member fields even though they are mapped. In this setup, the sync for Campaign Members is being performed by 'Add to SFDC Campaign' or 'Change Status in SFDC' flow-steps, but the Program itself is not set to sync with an SFDC Campaign. Environment SFDC Integration Solution This is the expected behavior, as the program member custom fields will only sync data to campaign member fields when the Salesforce Campaign Sync is setup for the Instance/Program in question. Using flow steps to sync SFDC Campaign Members will not carry over data for Program Member Custom Fields. Root Cause SFDC Campaign Sync is not enabled. Enable/Disable Campaign Sync Enable/Disable Campaign Sync | Adobe Marketo Engage Program Member Custom Field Sync Program Member Custom Field Sync | Adobe Marketo Engage

Summary Customers may face errors referencing Segmentations when importing programs between instances. Issue Program import fails giving an error message like the example below: "Marketo encountered an error while importing Nurture Program: EXAMPLE - Acquisition NUR B2B [SMB] FY24 - TEST Why: The Segmentation_Type_1003 field exists in the following objects: Person What to do now: Create a field named Segmentation_Type_1003 in the Person object." Environment Marketing Activities Import Program Solution The simplest solution would be to temporarily remove the Segmentation references from the child assets (Smart Campaigns, Smart Lists, etc.) that currently exist in the importing Program within the source instance. Once the import succeeds, references to the Segmentations can be re-added to the source (as well as the destination, if needed) instance's Program's assets.

Issue When trying to clone a Form or Landing page from Design Studio to a specific Program under Marketing Activities, there is no list of programs that appear. Solution This is expected behavior. When you don't see a program listed, this is because the number of programs in Marketing Activities actually exceeds what we're able to display at one time. If you start typing into the Program field in the pop-up window, you should start to see programs listed in the drop-down. For example, you enter the name of the particular program, you will get a result.

Issue Leads are stuck in a smart campaign's Wait Step and have not moved onto next steps, even though the Wait Step has been updated/shortened and the lead should move onto the next step. Solution When a lead enters a Wait Step, it remains in the Wait Step as defined at the moment they entered it. For example, if the lead enters a 1 week Wait Step, it will remain in the step for 1 week. If the Wait Step is updated to be longer or shorter (for example, shortened to 3 days or extended to 2 weeks), the lead that already entered the Wait Step (when it was 1 week) will remain in the Wait Step for the original duration. New leads entering the Wait Step will abide by the new duration.

Issue When cloning an asset from Design Studio into Marketing Activities, there is a box that asks you to select which program to clone the asset into. When clicking into this box, you may see No Results, even though there are programs within Marketing Activities. This is a article attached image Solution Expected Behavior: This happens when there are too many programs in the Marketing Activities tree. To select your desired Marketing Program, begin typing the Program Name, and results will begin to appear in the Program drop-down. This was designed to increase UI performance when cloning assets into Marketing Activities from Design Studio.

Issue Person record's Activity Log shows repeat Company Name changes without any Data Value Change being logged. In this example screenshot, we can see that the person had the Company Name set back to the correct value by the CRM sync, but there is no record of the Company Name being changed in the first place. This is a article attached image Environment Person records showing the change are all part of the same Account. One person on that holding Account fills out a form that updates the field "Company Name" to a value that is different from the Account Name CRM sync corrects the Company Name field back to Account Name Solution STEPS TO RESOLVE: 1. Find the lead that change the Company Name field on the account with a Smart List filter: DATA VALUE CHANGED Attribute: Company Name New Value: [Company Name from form fill-out] Previous Value: [Account Name] This is a article attached image 2. Locate the Data Value Change in the Activity Log 3. Check the date and time of the Data Value Change 4. Check that timeframe on other affected records 5. The timeframe of the Data Value Change back to the Account Name will approximately match the timeframe of the logged Data Value Change, showing that the update to the one person was the cause of the update for all others on that account. Root Cause Marketo uses Company Name as the identifier for the Account object. If you have multiple people on the account and one of them changes the Company Name via a form fill-out, the Company Name is changed for all other people on that Account. This change happens on the back end, so you will not see it until the CRM changes it back to the correct value in the next sync cycle.

Issue New person records are missing data and only contain Email Address. Environment On24 Event Partner Launchpoint Integration Solution When Marketo pulls the Attendance Report, for On24 Events through the On24 Launchpoint Event Partner integration, as documented here: ON24 Event Registration Updates | Adobe Marketo Engage For any net new records to Marketo (people who registered and attended the event outside of Marketo), Marketo will only sync the Email Address and Attendance Status. This will result in records in Marketo that do not have complete data from On24, such as First and Last Name. To avoid this scenario, it is recommended that all records are properly registered for the Event through Marketo, using Marketo Forms and Registration Campaigns as documented here: Create Child Campaigns and Local Assets | Adobe Marketo Engage

Knowledgebase

Maintaining a Directory of Leads Bouncing Emails

Top Blocklists - What You Need to Know

Email in Engagement Program Failed to Send

Using Tokens in Smart Campaigns

Trigger Campaign Best Practices

And/Or Logic in Trigger and Filter Constraints

View Email Opens and their time of activity per recipient

Service Level Targets (SLT)

Champion Challenger Test in Engagement Programs

Wait Step Duration Options

"Rule is Incomplete" Error When Attempting to Move Program Into New Workspace

Unable to reference AB test email in smart list or campaign

Flow step choice condition for "Person was Deleted from SFDC" with 'in past' "7 days" causes campaign failure

My token not displayed correctly in view as webpage version of email.

Program Member Custom Field Data Not Syncing To SFDC Campaign Members

Error During Program Import

Unable to Clone form from Design Studio into Marketing Activities

MyToken used in Email not reflecting correctly

Leads stuck in Wait Step after Wait Step Change

No Programs To Select When Cloning Assets From Design Studio To Marketing Activities

Person record's Activity Log shows repeat Company Name changes without any Data Value Change being logged

Newly Created Records from On24 Missing First/Last Name