Knowledgebase

Sort by:
Issue Emails cannot be delivered from the Marketo instance and the following Soft Bounce code was recorded in the record's activity log. 554 5.4.7 [internal] (last transfail: 435 5.7.8 Authentication credentials invalid) Environment Dedicated IP Address SMTP Relay credential invalid Soft Bounce Code: 554 5.4.7 [internal] (last transfail: 435 5.7.8 Authentication credentials invalid) Cannot send email Email Delivered not recorded in activity log Solution Provide Marketo Support with the updated credentials so Support can create an internal request to get the update the credentials on Marketo's end. The process can take up to three (3) business days to complete.  Note: Avoid using special characters in the password such as quotation mark (") as it can alter the configuration.    Root Cause The credentials for the SMTP Relay has been changed and no longer match what is stored in Marketo. In most cases it is the password as it need to be change on an annual basis.
View full article
What is a Blocklist? Can I Still Send My Emails, or Are You Blocking Me from Sending? What Is a Spamtrap and Why Do They Matter? Can You Give Me the Spam Trap Address That Triggered the Blocklist So I Can Remove It from My Database? Can You Give Me More Information regarding the Blocklist Issue? What Is the Quarantined IP Range? I Sent This Email Campaign a While Ago. Why Am I Only Getting Notification of the Blocklist Issue Now, and Am I Still Blocklisted? The Blocklist Notification Went to the Wrong Email Address. Why Was It Sent to That Address? Which blocklists should I be concerned about? - Top Blocklists – What You Need to Know How do blocklist issues get resolved? What steps do I need to take to resolve the blocklist issue? - Blocklist Remediation  
View full article
Summary You have set up a campaign or campaigns in the Email Deliverability Tool (250ok), but there is no engagement metric showing Total opens and Unique opens, which should be available in the ‘Engagement Overview’ in the Email Deliverability tool. You would need to ensure that you have configured the necessary setup for the tracking to work in the Email Deliverability tool. Issue Campaigns created in the Email Deliverability tool (250ok) doesn’t show any engagement overview metric such as total opens and unique opens. Environment Email Deliverability tool (Production/Sandbox) Solution You would need to implement the necessary setup for the metric to show in the Engagement Overview in the Email Deliverability tool (250ok)    Follow the steps below to ensure you have configured the setup for campaign tracking.   1. Ensure your DNS CNAME is configured. (All that is required is creating a CNAME DNS entry on this domain that points to 250analytics.com)  For more information, you can refer to this external documentation: https://www.validity.com/knowledge-base/what-are-custom-domains-in-250ok-analytics/   2. Insert the correct tracking pixel code retrieved from the Email Deliverability tool.    3. Always utilizing the ‘c=‘ tag in your tracking code for your campaigns to ensure the tracking is measured correctly in the Email Deliverability tool. (Obviously, the CNAME above is essential to have it set up correctly). You can follow a guide on how to implement the ‘c=‘ tag and retrieve the tracking pixel is here: https://help.returnpath.com/hc/en-us/articles/360046308092-How-Do-I-Add-My-250ok-Tracking-Pixel-   Once you have all these configuration settings, you can start tracking your campaigns which are sent via Marketo in the Email Deliverability > Engagement Overview. Root Cause Mis-configuration or no configuration made causing the campaign tracking does not work.
View full article
  Syntax Recommendations Common Look Up mechanisms Common Modifiers Too Many Mechanisms Character String Too Long Null Records in the SPF Record Repetitive Records in the SPF Record - Void Lookups Validation Tools Syntax Recommendations Common Look Up mechanisms a: mx: include: ip4: ip6: exists: ptr: all Common Modifiers redirect= exp=   An A Record must ALWAYS contain IP address (map host to IP) CNAME (Alias) must contain hostnames. No IPs here NS an MX records must contain host names. No IPs allowed. MX records (for mail servers)  should contain hostnames NOT IPs. Too Many Mechanisms Section 10.1, "Processing Limits" of the SPF RFC 4408 specifies the following in regards to DNS lookups: SPF implementations MUST limit the number of mechanisms and modifiers that do DNS lookups to at most 10 per SPF check, including any lookups caused by the use of the "include" mechanism or the "redirect" modifier.  If this number is exceeded during a check, a PermError MUST be returned.  The "include", "a", "mx", "ptr", and "exists" mechanisms as well as the "redirect" modifier do count against this limit.  The "all", "ip4", and "ip6" mechanisms do not require DNS lookups and therefore do not count against this limit. The "exp" modifier does not count against this limit because the DNS lookup to fetch the explanation string occurs after the SPF record has been evaluated. This limit is in place to prevent SPF lookups from being a useful avenue for Denial of Service attacks. Using an example SPF record as an example to illustrate, this record was breaking with 12 look-ups: example.com text = "v=spf1 include:_spf-a.example.com include:_spf-b.example.com include:_spf-c.example.com include:_spf-ssg-a.example.com include:spf-a.anotherexample.com ip4:131.107.115.215 ip4:131.107.115.214 ip4:205.248.106.64 ip4:205.248.106.30 ip4:205.248.106.32 ~all" [ 5 mechanisms] _spf-a.example.com  text = "v=spf1 ip4:216.99.5.67 ip4:216.99.5.68 ip4:202.177.148.100 ip4:203.122.32.250 ip4:202.177.148.110 ip4:213.199.128.139 ip4:213.199.128.145 ip4:207.46.50.72 ip4:207.46.50.82 a:mh.example.m0.net ~all"  [ +1 = 6 mechanisms] mh.example.m0.net a = 209.11.164.116 _spf-b.example.com text = "v=spf1 include:spf.messaging.example.com ip4:207.46.22.35 ip4:207.46.22.98 ip4:207.46.22.101 ip4:131.107.1.27 ip4:131.107.1.17 ip4:131.107.65.22 ip4:131.107.65.131 ip4:131.107.1.101 ip4:131.107.1.102 ip4:217.77.141.52 ip4:217.77.141.59 ~all" [+1 = 7 mechanisms] spf.messaging.example.com text = "v=spf1 include:spfa.anotherexample.com include:spfb.anotherexaple.com include:spfc.anotherexample.com -all"  [+3 = 10 mechanisms] spfa.anotherexample.com  text = "v=spf1 ip4:157.55.116.128/26 ip4:157.55.133.0/24 ip4:157.55.158.0/23 ip4:157.55.234.0/24 ip4:157.56.112.0/24 ip4:157.56.116.0/25 ip4:157.56.120.0/25 ip4:207.46.100.0/24 ip4:207.46.108.0/25 ip4:207.46.163.0/24 ip4:134.170.140.0/24 ip4:157.56.110.0/23 -all" [+0 = 10 mechanisms] spfb.anotherexample.com  text = "v=spf1 ip4:207.46.51.64/26 ip4:213.199.154.0/24 ip4:213.199.180.128/26 ip4:216.32.180.0/23 ip4:64.4.22.64/26 ip4:65.55.83.128/27 ip4:65.55.169.0/24 ip4:65.55.88.0/24 ip4:94.245.120.64/26 ip4:131.107.0.0/16 ip4:157.56.73.0/24 ip4:134.170.132.0/24 -all" [+0 = 10 mechanisms] spfc.anotherexample.com  text = "v=spf1 ip4:207.46.101.128/26 ip6:2a01:111:f400:7c00::/54 ip6:2a01:111:f400:fc00::/54 ip4:157.56.87.192/26 ip4:157.55.40.32/27 ip4:157.56.123.0/27 ip4:157.56.91.0/27 ip4:157.55.206.0/24 ip4:157.55.207.0/24 ip4:157.56.206.0/23 ip4:157.56.208.0/22 -all" [ +0 = 10 mechanisms] _spf-c.example.com  text = "v=spf1 ip4:203.32.4.25 ip4:213.199.138.181 ip4:213.199.138.191 ip4:207.46.52.71 ip4:207.46.52.79 ip4:131.107.1.18 ip4:131.107.1.19 ip4:131.107.1.20 ip4:131.107.1.48 ip4:131.107.1.56 ip4:86.61.88.25 ip4:131.107.1.44 ip4:131.107.1.37 ~all" [+0 = 10 mechanisms] _spf-ssg-a.example.com  text = "v=spf1 include:_spf-ssg-b.example.com include:_spf-ssg-c.example.com ~all"  [+2 = 12 mechanisms] _spf-ssg-b.example.com  text = "v=spf1 ip4:207.68.169.173/30 ip4:207.68.176.1/26 ip4:207.46.132.129/27 ip4:207.68.176.97/27 ip4:65.55.238.129/26 ip4:207.46.222.193/26 ip4:207.46.116.135/29 ip4:65.55.178.129/27 ip4:213.199.161.129/27 ip4:65.55.33.70/28 ~all"  [+0 = 12 mechanisms] _spf-ssg-c.example.com text = "v=spf1 ip4:65.54.121.123/29 ip4:65.55.81.53/28 ip4:65.55.234.192/26 ip4:207.46.200.0/27 ip4:65.55.52.224/27 ip4:94.245.112.10/31 ip4:94.245.112.0/27 ip4:111.221.26.0/27 ip4:207.46.50.221/26 ip4:207.46.50.224 ~all" [+0 = 12 mechanisms] spf-a.secondexample.com  text = "v=spf1 ip4:157.55.0.192/26 ip4:157.55.1.128/26 ip4:157.55.2.0/25 ip4:65.54.190.0/24 ip4:65.54.51.64/26 ip4:65.54.61.64/26 ip4:65.55.111.0/24 ip4:65.55.116.0/25 ip4:65.55.34.0/24 ip4:65.55.90.0/24 ip4:65.54.241.0/24 ip4:207.46.117.0/24 ~all" [+0 = 12 mechanisms] Character String Too Long 255 character limitation in a single string https://kb.isc.org/article/AA-00356/0/Can-I-have-a-TXT-or-SPF-record-longer-than-255-characters.html http://www.string-functions.com/length.aspx You may have more than 255 characters of data in a TXT or SPF record, but not more than 255 characters in a single string. If you attempt to create an SPF or TXT record with a long string (>255 characters) in it, BIND will give an error (e.g. "invalid rdata format: ran out of space".)  Strings in SPF and TXT records should be no longer than 255 characters.  However to get around this limitation, per RFC 4408 a TXT or SPF record is allowed to contain multiple strings, which should be concatenated together by the reading application.  In the case of use for SPF (using either TXT or SPF RRs) the strings are concatenated together without spaces as described below.  Reassembly by other applications of multiple strings stored in TXT records might work differently. 3.1.3. Multiple Strings in a Single DNS record As defined in [RFC1035] sections 3.3.14 and 3.3, a single text DNS record (either TXT or SPF RR types) can be composed of more than one string. If a published record contains multiple strings, then the record MUST be treated as if those strings are concatenated together without adding spaces. For example: IN TXT "v=spf1 .... first" "second string..." MUST be treated as equivalent to IN TXT "v=spf1 .... firstsecond string..." SPF or TXT records containing multiple strings are useful in constructing records that would exceed the 255-byte maximum length of a string within a single TXT or SPF RR record. EXAMPLE text = "v=spf1 ip4:199.15.212.0/22 ip4:72.3.185.0/24 ip4:72.32.154.0/24 ip4:72.32.217.0/24 ip4:72.32.243.0/24 ip4:94.236.119.0/26  ip4:37.188.97.188/32 ip4:185.28.196.0/22 ~all“ text = "v=spf1 ip4:199.15.212.0/22“ " ip4:72.3.185.0/24 ip4:72.32.154.0/24 ip4:72.32.217.0/24" " ip4:72.32.243.0/24 ip4:94.236.119.0/26" " ip4:37.188.97.188/32 ip4:185.28.196.0/22 ~all" Null Records in the SPF Record A record that is NULL or that does not exist will break an SPF record.  Syntax within the record is very important, if there are extra spaces between mechanisms it will count as NULL. EXAMPLE text = "v=spf1 ip4:199.15.212.0/22“ <- accurate text = "v=spf1 ip4: 199.15.212.0/22“ <- NULL (NOTE the space between IP4: and the IP) Repetitive Records in the SPF Record - Void Lookups If there are too many repetitive mechanisms in the SPF record, including records that cascade (for example when using "include:") the record will break. There is a MAX of 2 void look ups in an SPF record.  More than that and the record will break.  This prevents SPF records from being used in Denial of Service style attacks. Validation Tools SPF checker, syntax validator and SPF tester http://www.kitterman.com/spf/validate.html SPF checker http://vamsoft.com/support/tools/spf-policy-tester SPF validator http://vamsoft.com/support/tools/spf-syntax-validator CIDR Calculator http://www.subnet-calculator.com/cidr.php Nslookup http://network-tools.com/nslook/ SPF creation wizard http://www.microsoft.com/mscorp/safety/content/technologies/senderid/wizard/ Common SPF errors http://www.openspf.org/FAQ/Common_mistakes SPF syntax definitions http://www.openspf.org/SPF_Record_Syntax
View full article
An email being filtered to a quarantine or bulk mail folder happens after the recipient mail server has accepted message.  Once an email has been accepted by a mail server, it is impossible to tell where it went or what happened to it.  Note that this is true of any mail sent by any system on the Internet.   Every mail server has configurable filters that determine how received mail will be handled.  The mail server administrator should be able to adjust those filters to ensure delivery of emails based on their business standards, or there may even be end-user-configurable controls that can accomplish the same thing.   If test mailings you are sending to yourself or your colleagues are being filtered to a quarantine or bulk mail folder, you should consider asking your email administrator to whitelist Marketo’s IP ranges.  They can be found here.   You can also improve your deliverability in general by setting up SPF and DKIM records, and branding your tracking links.
View full article
We have enhanced the behavior of the unsubscribe functionality to make it “durable”.  We have added a master email status, which is separate from the unsubscribe flag visible on the lead detail record.   If the unsubscribe flag is set from false to true, the master email status is updated, and the change is propagated to other leads with the same email address. Update the Unsubscribe flag from True to False (e.g. Re-subscribe a lead) When a lead is imported, the unsubscribe flag WILL NOT be overwritten by the import. Here are the ways a lead can be re-subscribed: 1.   In SFDC, uncheck the Email Opt Out field.  This WILL sync to Marketo. 2.   Manually update the lead detail record by un-checking the unsubscribe flag 3.   Run a Change Data Value Flow Action on one or many leads a.  Select the attribute “unsubscribe” and set the value to False 4.   Update an existing lead via SOAP API 5.   Form Field – set a field on a form to set the unsubscribe flag to “false” and this will unsubscribe the lead a. Best practice would be to have text on the form that says that by filling out this form, they are agreeing to receive email communication Creating a New Lead When a new lead is created, we check it against the master email status table.  If the lead was previously unsubscribed, we will update the record to be unsubscribed.   Changing an email address If you change the email address of a lead to an unsubscribed email address, the lead will be unsubscribed.  This change can occur in either Marketo or SFDC. If you change an unsubscribed email address to one that is subscribed, the lead will be subscribed.    
View full article
No, if you have received the blacklist notification, you are not blocked from sending mail.  You can continue to mail while you work through the remediation steps. The only time we will ever block you from sending mail is if you trigger a listing at Spamhaus, the world’s most respected and widely used blacklist. If this happens, you will receive a call or email to let you know what’s going on and we will work with you to resolve the issue. This is a rare occurrence. Additional Resources: Can you give me the spam trap address that triggered the listing? What is a spamtrap, or spam trap, and why does it matter? What is a blacklist? How does Marketo respond to blacklisting and spam notifications? Top blacklists - What you need to know Blacklist Remediation Successful Reconfirmation
View full article
We manage our network to provide our customers with the highest server availability and best deliverability possible.  Marketo has a strong anti-spam policy and a team that handles blacklist notifications in our IP space and spam complaints.  We also cooperate with most major anti-spam providers and ISPs.  In addition, we maintain feedback loops for many of the most popular email providers.  For more information on feedback loops and ISPs with whom we have this arrangement, click here. Blacklistings are usually caused by sending mail to a spam trap email address.  For an explanation on what causes blacklisting, click here. When we receive notification of a blacklisting, we react in two ways.  First, we go through the procedures to remove the listing from that blacklist as soon as possible.  Second, we determine (if possible) which of our customers caused the blacklisting and work with them to improve their mailing lists to prevent a reoccurrence in the future.  This is usually a cooperative process, most frequently, a review of mailing policies and strategic pruning of a customer’s lead database will return them to best practices.    
View full article
  Quick points: *Spamtraps are addresses owned by antispam organizations *Emailing a spamtrap (usually) gets your IP or domain blacklisted *Maintain current, direct opt-in with an active lead database to avoid this     What is a spam trap or spamtrap?   A spam trap, or spamtrap is an email address secretly owned by an antispam organization that is used to detect spam. Antispam organizations do not sign up for mailing lists, so they consider any email sent to these addresses to be spam. Once email is sent to the spamtrap, the antispam organization that owns this address will blacklist the IP that sent the email (or, less often, domains that are linked in the message).   Email administrators purchase subscriptions to various blacklists, and use the lists to block all incoming email from listed IPs or containing listed domains. From the marketer’s perspective, this can mean a high number of bounced emails leading to low lead engagement, and ultimately to weak revenue performance.   There are two types of spamtraps – pristine traps, and repurposed/recycled traps. A pristine trap is an email address that was never used by a person. A repurposed trap is an email address that once belonged to someone but is no longer a valid address; these addresses will bounce as bad addresses for at least six months before an antispam organization will turn them into live traps.<   How can a spamtrap get into my Marketo lead database?   Purchased data   Purchased data is unreliable. The antispam world does not like the use of purchased data so antispam administrators have made a concerted effort to get spamtrap addresses into the databases of data vendors. While data vendors may say they provide opt-in data in reality consent should be direct to your company./p> Sending unsolicited email is prohibited by the Marketo Terms of Use because this practice has a high risk of causing blacklist issues that can destroy deliverability for multiple Marketo customers. To avoid spam traps get direct opt-in before sending email. If you have purchased data in the past we recommend setting any inactive purchased leads to marketing suspended or simply removing them from your database. Old data Repurposed traps are email addresses that were once valid but are now owned by an antispam organization. This can happen when a company goes out of business; expired domains are often purchased by antispam organizations. Sometimes a company that has a direct partnership with an antispam organization will allow email addresses of former employees or users to become spamtraps. Because antispam organizations will generally make sure future spam traps return a bounce as bad addresses for at least six months before they become spam traps you can prevent repurposed traps in your database by emailing remaining engaged with everyone in your database at least once every six months. Avoid “wake the dead” campaigns to addresses you have not contacted in more than six months. Unconfirmed form entries People can unintentionally enter spamtrap addresses into forms either by making a typo or by intentionally using a fake email address that happens to be a spamtrap. If you use single opt-in, you may add spamtraps to your mailing list. This is more likely to happen if you are a B2C company or if someone thinks they can get whitepapers or free trials simply by filling out a form with made-up information.   How can I identify spamtrap addresses?   Spamtrap addresses are considered trade secrets by the antispam organizations. They do not share these addresses because their goal is for senders to change their mailing practices rather than to simply remove spamtraps from their mailing lists.   That said, one thing we do know about spamtraps is that they tend to be automated processes and do not engage. Spamtraps do not click links. You can use smart list filters to identify inactive leads in Marketo.   How can I prevent spamtraps in my database? Maintain active, direct opt-in for all leads. Don’t purchase data. (To grow your list, sponsor events, use list rental services that send the first message for you, or use co-branded content that sends you only good leads) Email everyone you want to email at least once every six months Don’t add old data directly to your mailing list. (If you need to, add in small batches and send a welcome email with a slightly different subject to each batch.) Regularly clean your database of inactive leads Grant access to assets such as free trials and whitepapers as email links to discourage intentional use of fake email addresses on forms Use scripting on your forms to identify potential typos
View full article
Overview   A blacklist is a database of IP addresses or domains that have been associated with the sending of unsolicited commercial email or spam.  Internet Service Providers (ISPs) and business email networks use information from blacklists to filter out unwanted email.  As a result there can be a drop in inbox delivery rates or overall delivery rates if the IPs or domains involved with sending email are listed on a blacklist. Marketo’s Email Delivery and Compliance team monitors blacklist activity on our IPs and domains daily. When we are alerted to a listing we reach out to the blacklist, attempt to identify the sender that triggered it, and work with the blacklist organization to get the listing resolved. There are thousands of blacklists out there most will not have a significant impact on your delivery rates. Below we have compiled a list of the blacklists that our customers most commonly encounter. Tier 1 Blacklist Spamhaus Impact: Spamhaus is the only blacklist that we categorize as a tier 1 for a reason: it has by far the greatest impact on delivery of all of the blacklists. It is the most well-respected and widely used blacklist in the world. A listing at Spamhaus will have a negative effect on your ability to deliver emails to your customer’s inbox and can cause bounce rates of over 50%.  Evidence suggests that most of the top North American ISPs use Spamhaus to inform blocking decisions. How it works: Unlike many blacklists, Spamhaus lists senders manually. This means that they are proactively watching sender activity, collecting data, and basing their listings on a number of variables. Most commonly senders are listed for mailing to spam trap addresses that Spamhaus owns. Sometimes Spamhaus will list senders based on recipient feedback as well. Next steps: Our team monitors closely for Spamhaus listings. When we see a listing we immediately alert the customer and contact Spamhaus to start the remediation process. Listings last until Spamhaus is satisfied that the offending sender has taken the appropriate steps to mitigate the problem.   Tier 2 Blacklists SpamCop Impact: SpamCop is not used by any of the major North American ISPs to inform blocking decisions but it makes it to the Tier 2 list because it can have a significant impact on B2B email campaigns. How it works: SpamCop lists IPs for one of two reasons: Either the email hit SpamCop spam trap addresses OR A SpamCop user has reported the email unwanted. Most of SpamCop’s spam traps are previously valid addresses that have not been active for 12 months or longer. Next steps: SpamCop is a dynamic blacklist, listings typically resolve themselves within one business day.  There is no action you will need to take to action the delisting with SpamCop, the Privacy Team researches every SpamCop listing and will request delistings when an alert is received that an IP is listed. If your email activity triggered a SpamCop listing it likely means that you have a list management problem that should be addressed. Manitu Impact: Manitu is a German blacklist and has a wide footprint in Europe.  Email senders with European audiences tend to encounter this blacklist most frequently. Manitu is not used by North American ISPs to inform blacklist decisions but if you’re sending to Europe a listing could be problematic. How it works: Listings are automatically activated when a sender mails to a Manitu owned spam trap address. Next steps: The Privacy Team researches and requests delisting when an alert is received that a Marketo IP is listed.  By working with this blacklist the Privacy Team is usually able to identify the customer and let them know that email activity from their subscription triggered a listing. Because Manitu operates solely on the use of spam trap addresses, getting listed by Manitu is a clear indication that senders need to audit their mailing lists.   Tier 3 Blacklists      SORBS   Impact: The impact of a listing at SORBS is very minimal. How it works: SORBS uses several methods to identify potential spammers. Most of their lists use spam traps to identify problematic senders. But SORBS will also list a sender based on their own user complaints, if SORBS administrators have received spam from the sender, or if they identify other high-level sending behavior patterns characteristic of spammers. Next steps: The Privacy Team monitors SORBS activity and makes delisting requests for Marketo IPs as necessary. Oftentimes, SORBS will refuse to delist within a certain timeframe based on the severity of the issue.  Sometimes this can be up to several weeks.   UCEPROTECT Impact: The impact of a listing at UCEPROTECT is very minimal, though the blacklist has a greater footprint in Europe. The organization does not have a good reputation in the industry because they charge senders to request delisting. How it works: UCEPROTECT lists IPs that send mail to their spam trap addresses. Next steps: We ignore these listings because the only way to have them removed is to pay. The pay-to-delist model is not well respected in the email industry so UCEPROTECT has a very limited reach.   ISP Blacklists   Some ISPs have their own blacklists that they use to inform blocking decisions. A few examples are Comcast and Verizon. If your IP is being blocked by one of these networks, and those networks have a large presence in your lists, a block of this kind could have a noticeable negative impact on delivery. Marketo monitors for this type of ISP specific blacklisting and the the Privacy Team works to resolve these as soon as possible. Usually blocks at Comcast and Verizon are resolved within less than 24 hours of a delisting request.   Additional Resources: Blacklist Deep Dive Abuse Report Deep Dive What is a spamtrap, or spam trap, and why does it matter? Blacklist remediation Blacklist resolution flowchart Successful lead reconfirmation What is a blacklist?
View full article
If you sent an email from the Lead Database (as a Single Flow Action), as part of a campaign, or as a test email but didn't receive it, here are some tips.   Check the "From:" address   When sending a test message, make sure to check the "From:" address setting on your message. To do this, go to the Email Settings tab of the email editor. In the "From:" field, make sure that you either have a single valid email address, or a valid email address as the default, if you are using a token.   Many people want to send their messages from the lead owner. When you use the send test feature, the email address you are sending to doesn't have a full lead record, and so it doesn't have a lead owner. Since Marketo cannot send an email with no "From:" address, test messages without a valid email address in the "From:" field will not send.   Send as a Lead   If you have verified that the email had a valid From: address and you still aren't getting it, make sure to create yourself as a lead and send using a flow action.   See if the mail was sent   If you sent the email as part of a campaign or Single Flow Action, check the campaign's Results tab or your lead detail page to see if that mail was already sent to you. If it hasn't been sent yet, try waiting a little while longer.   Check your Junk Mail   In your email client, check your Junk Mail or Spam folder to see if the mail landed there. If it did, you should change the content of your email.   Check your corporate spam filter   Your corporate mail server may have blocked emails from Marketo; you should contact your IT department to see if this is the case. Please see our instructions for whitelisting Marketo's email servers: Add Marketo to Your Corporate Email Whitelist   Try sending to a different recipient   If you sent the original mail to your corporate account, try sending to a personal account on Yahoo or Gmail. If you sent it to a personal account, try your corporate mail account.    Use Marketo's Email Deliverability product   The Email Deliverability PowerPack, with Design Informant and Inbox Informant, can warn you when your mail is being rejected because of its content and help you identify junk mail pitfalls. Also, using Domain Keys and SPF improve the chances of your email landing in your leads' inboxes.   Contact Marketo   If you still can't figure out what happened contact Marketo to see if we can help.
View full article
When someone emails abuse@marketo.com to tell Marketo that they received unsolicited email from one of our customers, the result is called an abuse report.  Instead of just hitting the “Report Spam” button, someone actually took the time to write to our abuse@marketo.com address and explain to us that they never wanted email from the sender.  Because of this direct complaint we take these types of spam reports very seriously. Only about 10% of our customers ever receive any abuse reports at all so it is cause for investigation if you receive one. If you receive notification that someone filed an abuse report against your account review your list management practices. Below are some things to consider: When people sign up to receive emails from you, is it made clear to them that they are giving you permission to email them? Have you recently added any new leads or lead sources? Have you recently added older leads to your database that you have not reached out to in the past 6 months or more? Was there anything about the campaign that was complained about that makes it different from previous campaigns?   In most cases people file these kinds of reports because: They never requested to be on your email list. They did request to be on your email list at some point but have forgotten because they have not heard from you in so long.   The importance of using explicit opt-in in your list building efforts cannot be stressed enough. You should also send to active leads consistently enough that they continue to expect emails from you. The best ways to avoid complaint driven reputation issues is to send to opted-in, engaged recipients. To help with this, a lot of senders clear out their inactive leads every 6 months or so. An inactive lead is a contact that has taken no action in the given time period— they haven't opened an email, clicked a link, visited your webpage, attended a Webinar, and so forth. Inactive leads are a dangerous group to continue mailing to because their behavior proves that they do not want to interact with your mail and will likely complain to Marketo or to their ISPs about it. We have a great resource on how to create a Smart List to remove inactive leads here. If you still need some help, please feel free to reach out to our Support team (support@marketo.com). Additional resources: Abuse Report Deep Dive Blacklist Deep Dive    
View full article
Abuse Report An abuse report is when an email recipient forwards a complaint directly to abuse@marketo.com.  Marketo’s Privacy and Compliance Team processes all complaints to these addresses and will unsubscribe the complainer when possible.   Feedback Loop Complaint A feedback loop complaint is when an ISP forwards the complaints that originate from their users.  For example, when someone clicks the SPAM or JUNK button in their email client. ISPs that offer FBLs expect that subscribers like Marketo will mark the complainer as unsubscribed in the original database.  Marketo does process FBL complaints and marks the email address as unsubscribed.   Additional Information: Feedback Loops (FBL) Abuse Report Deep Dive Finding Leads that are Auto Unsubscribed for Email Spam Complaints / Feedback Loop (FBL)    
View full article
Note: Once you have migrated to Admin Console, you can manage your support cases through the feature provided in the Admin Console Platform. To learn more, visit: https://experienceleague.adobe.com/docs/customer-one/using/home.html. Once you have submitted a case to Marketo support, we provide a simple way of staying connected to your case and the cases submitted from your company through the Marketo Support Portal. You can access the support portal through your Marketo instance by selecting Community in the top right corner: This is a article attached image You can also access the support portal directly at https://support.marketo.com and login with your Marketo credentials (login and password). This will not work for users with SSO.   Once you are in the support portal you can Create a Case for Marketo Support or you can also review any cases that are open and being worked on by support or review your case history. Navigate to My Case management: This is a article attached image From the My Cases navigation you can access the following case views: This is a article attached image My Recent Cases* - Cases that you have opened in the past 30 days All Company Recent Cases* - Cases that any authorized support contact has opened in the past 30 days My Open Cases – Cases created by you that are being triaged by Support and pending Support’s response and are more than 30 days old My Closed Cases – Cases that were created by you and are now closed My Awaiting Fix Cases – Cases that were created by you where Marketo is developing a fix which will be implemented at a later date All Company Closed Cases – Cases that were created by you or your colleagues that are now closed All Company Open Cases - All open cases submitted for the account Company Awaiting Fix Cases – Cases that were created by you or your colleagues where Marketo is developing a fix which will be implemented at a later date Management Escalations - Escalations opened by you or your colleagues  Survey Cases - Surveys that are available for you to fill out after a case is closed *Cases that have been opened for more than 30 days will move from Recent cases to Open cases   To view specific case details, click a case number. This is a article attached image From the Case Details, you can perform the following: Close your Case - Select the "My Case is Resolved" button to close your case Add Comments - Provide additional comments to support or respond to a Support question Add Attachment - Provide any screenshots or documents that will help illustrate the issue you are reporting   If your case has been closed there are two options available to you.   Reopen - You can reopen your case if you are not satisfied with the case resolution by adding a comment in the case. Case Survey - Once your case has closed, please consider offering feedback on the level of Support you received.
View full article
When a customer triggers a blacklisting on Marketo's shared IP range that customer is moved to a set of IPs we call the quarantined IP range.  We do this to protect the health of our shared network and ensure the best deliverability possible for all of our customers on that network.   If you have received a Blacklist Notification from Marketo reporting that you have triggered a blacklisting your Marketo account is now in the quarantined IP range.   While you are in the quarantined range it is possible that you may experience a slight decrease in your deliverability rates. The reason for this is that you are now sending from a range made up of senders that have also caused other blacklist issues. All customers have received a notice of the listing and are in the process of repairing their database.   There are two ways to be removed from the quarantined IP range: Follow the steps outlined in our Blacklist Remediation article.  Be sure to fill out the form referenced in the email alert to indicate that you have taken steps to mitigate the issue. Demonstrate clean sending behavior for 3 months. We remove senders from the quarantined IP range if they have not triggered any new listings in 3 months.   To ensure your best deliverability rates blacklist issues should be addressed right away to prevent further damage to your sending reputation.   Furthermore, if no action is taken to improve list hygiene the issue will likely recur. Marketo's Privacy Team strongly recommend following the Blacklist Remediation steps.   Additional Resources: Blacklist Deep Dive  
View full article
Unfortunately, we can only provide you with whatever information the blacklist provided to us. This information should all be included in the notification email you received from us. If that notification did not contain any information about the email campaign that triggered the blacklist issue, please contact Support.   Additional Resources: Can you give me the spam trap address that triggered the listing? What is a spamtrap, or spam trap, and why does it matter? What is a blacklist? How does Marketo respond to blacklisting and spam notifications? Top blacklists - What you need to know Blacklist Remediation Successful Reconfirmation
View full article
When using Marketo it is not a requirement to set up DNS text records for SPF and DKIM.  However, Marketo recommends setting up SPF and DKIM because it improves the deliverability of your mailings.  Configuring and implementing one or both of these records is a way to verify that the server sending your mail is authorized to do so.   If a recipient domain is configured to check for SPF and/or DKIM and those DNS records are available and your mail passes the SPF/DKIM check, it further reinforces its good reputation.  Not implementing SPF/DKIM records does not add to or subtract from its reputation, it’s just not there.   Please note, not all domains check for SPF/DKIM and if this is the case, again, the presence of these records does not add or subtract from your mail’s deliverability. There is no negative effect to setting up these records, and it can improve your deliverability.  It is for these reasons that Marketo recommends setting up these DNS records and configuring their use in your instance of Marketo.   For more information on how to set up and configure SPF/DKIM, please read our KB article here.
View full article
  Overview Add Leads to Static Lists Use Custom Fields Overview Lead records have two primary components – lead attributes and activity logs. Lead attributes are the fields and field values within the lead record. For example, Job Title is a lead attribute. Lead Name is a lead attribute. Activity logs record the actions Marketo or the lead themselves have taken. For example, sending an email to a lead is an activity that would show in the activity log. If the lead opens the email or visits a tracked page, those activities would show in the activity log as well.   Activities in the activity log are only retained for 25 months, or 37 if you have purchased the premium data retention option. The main way to store activity data beyond the Data Retention Policy timeframe is to use the Bulk Extract API. There are two other ways you can keep a reference of these activities after the end of the Data Retention period, and they can be referenced within the Marketo UI. This article will show you how that can be done.     Add Leads to Static Lists Static lists will retain lead membership even if the activity of adding the lead to the list has been removed. This will let you have lists dedicated to specific criteria that would otherwise be removed after the data retention time period has been passed.   For example, Smart Campaign membership history is not retained after 25 months. If you are searching for members of a Smart Campaign, but a lead first became a member of the Smart Campaign more than 25 months ago, the search results would not include that lead.   An easy way to work around that is to add your leads to a static list as part of the flow of the campaign. When creating your Smart Campaign, create a new static list with the same corresponding name (makes it easier to identify later). When building the flow of your campaign, add the "Add to List" flow step so that all leads going through the campaign will be logged on the list.         Use Custom Fields Lead attributes and their field values are not affected by the Data Retention Policy. Use Smart Campaigns to populate custom fields with values based on activities your leads take. This will allow you to filter leads by these lead attributes that are not affected by the Data Retention Policy. A side benefit to this is that it is faster to search by lead attributes than by searching through lead activity logs.   Example: This approach can work for many different activities, but let’s use form fill outs as an example.   Let’s say you want to be able to identify leads who have been very active and have filled out more than 5 forms over their lifecycle. You could use the filter “Filled Out Form” with the “Min. Number of Times” constraint set to 5. However, if one of those forms filled out occurred more than 25 months ago, the filter would only be able to access 4 form fill activities in the activity log. Therefore, the lead would not pass the filter.   Instead of using the “Filled Out Form” filter, set up a Smart Campaign to write to custom fields that show you how many forms they’ve filled out, and when the first one was. Here’s how to do it:   1. Create two new custom fields in Marketo, one Score Field, and the second a Date Field.   2. Create a new Smart Campaign   3. Add the trigger “Fills Out Form” set to “is any” to the Campaign Smart List     4. Add these two Flow Steps to the Campaign Flow: Flow Step 1: “Change Score” Score Field Name: your score field name Change: +1   Flow Step 2: “Change Data Value” Add Choice to Flow Step Choice 1: If “your score field name”  “is empty” Attribute “your score field name” New Value: {{system.date}} Default Choice: Do Nothing       This campaign will listen for any time a lead fills out a form, add +1 to your score field, and if it’s the very first form they’ve ever filled out, it will log the date of when it was done. If the lead has ever filled out a form in the past, there will already be a date value in the date field, so the flow choice would just skip over it and do nothing.       Results You’ll See: With the original goal of identifying leads who have filled out more than 5 forms you’ll be able to filter for leads that have filled out at least 5 forms. In addition, this campaign will let you search for leads based on when they had filled out their very first form, regardless of how long ago it was. Since it’s stored in a lead field, it’s a lead attribute that is not affected by the Data Retention Policy at all.      
View full article
Any emails being sent as part of 'Forward to Friend' will create that user as a new lead (provided that the lead does not already exist in Marketo). When leads are created in Marketo via the 'Forward to Friend' feature, Marketo automatically unsubscribes the lead records in order to protect our global customers from anti-spam laws. This is because a lead being sent a forwarded email doesn't qualify as opting in to a mailing list and also prevents them from getting any other emails by accident.    
View full article
Issue Issue Description An email was sent to leads but immediately returned an 'Email Bounced Soft' Activity Type with the Activity Details stating: 'Details: Empty address: []'   Solution Issue Resolution This is due to a token used in the 'From Address' Field in the Email editor that does not have a valid value or valid default value. For example: {{lead.Partner Email:default=edit me}} The Record's field value for 'Partner Email' is Empty. As there is no value for the record the token would use the default value 'edit me' which is not a valid value. A valid value must be an email string format such as mark@eto.com  
View full article